Remote control
display
Indicator
ECONAVI
To optimise energy saving
MODE
To select operation mode
AUTO - For your convenience
COOL - To enjoy cool air
DRY - To dehumidify the environment
MILD DRY
COOLING
To improve humidity and
moisture level
• This operation reduces air dryness and
provides you with a comfortable living
environment during COOL mode only.
• When vertical airfl ow direction is set to AUTO,
it stops at lower position to avoid cold air
contact. However, you can adjust the louver
direction manually.
POWERFUL/
QUIET
To switch between
powerful & quiet
QUIETPOWERFUL NORMAL
POWERFUL: To reach temperature quickly
POWERFUL
• This operation stops automatically after 15
minutes.
QUIET: To enjoy quiet operation
QUIET
• This operation reduces airfl ow noise.
How to use
Press and hold for
approximately
10 seconds to show
temperature setting in
°C or °F.
Press to restore the
remote control to
default setting.
Not used in normal
operations.
FAN SPEED
To select fan speed
(Remote control display)
• For AUTO, the indoor fan speed is automatically
adjusted according to the operation mode.
Sunlight sensor and
remote control receiver
TIMER
AUTO COMFORT
MILD DRY
COOLING
POWERFUL
QUIET
POWER
(Green) (Green) (Blue) (Orange)(Orange)(Orange) (Green)
Auto OFF/ON button
AUTO
OFF/ON
Use when remote control is misplaced or a malfunction occurs. Raise the front panel:
1. Press the button once to use in AUTO mode.
2. Press and hold the button until you hear 1 beep, then release to use in forced
COOL mode.
• Press the button again to turn off.
To Next Page
Loading...
