50
11 Disassembly of the parts
1. Open the intake grille and pull it to the horizontal
position. (Fig. 1)
2. Pull up the intake grille until it falls off.(Fig. 2)
Removal Procedure For Intake Grille
1.Remove the two caps at the discharge port (right and
left) (Fig. 3)
2.Release the two screws under the both caps. (Fig. 4)
Removal Procedure For Front Grille
Cap
Fixing Screw
Fig. 3
Fig. 4
Fig. 5
Front Grille
3.Pull out the front grille from the unit body. (Fig.5 )
CS-PW9GKX / CU-PW9GKX / CS-PW12GKX / CU-PW12GKX
Fig. 2
Fig. 1
OpenerOpener
WARNING
High Voltage is generated in the electrical parts area by the capacitor. Ensure that the capacitor has discharged
sufficiently before proceeding with repair work. Failure to heed this caution may result in electric shocks.
To Next Page
Loading...
