Panasonic CS-RZ60XKRW

Need help?

Do you have a question about the Panasonic CS-RZ60XKRW and is the answer not in the manual?

Summary

Quick Guide

Inserting Batteries

Instructions for inserting batteries into the remote control.

Clock Setting

Procedure for setting the current time on the remote control.

Basic Operation

Starting, Stopping, and Mode Selection

How to start, stop, and choose the operation mode of the air conditioner.

Temperature Adjustment

Steps to set the desired temperature using the remote control.

Safety Precautions

Unit and Remote Control Safety

Safety guidelines for indoor/outdoor units and the remote control.

Power Supply and Operational Safety

Precautions for power supply, unit operations, and environmental factors.

Flammable Refrigerant Safety

Safety measures for handling flammable refrigerant (R32) and system integrity.

Installation and Servicing Safety

Safety procedures for installing, servicing, and maintaining the unit.

Refrigerant Handling and Decommissioning

Safe methods for refrigerant removal, charging, and decommissioning.

How to Use

Airflow and Fan Settings

Adjusting airflow direction, fan speed, and quiet operation modes.

Powerful;Eco and Sleep Modes

Using powerful, eco-saving, and sleep modes for comfort and efficiency.

Timer Operation

Setting the timer to turn the unit on or off at specific times.

To Learn More...

Operation Modes and Settings

Detailed explanation of operation modes, energy saving temperatures, and airflow.

Auto Restart Control

Information on how the unit restarts after a power failure.

Operating Conditions

Temperature Range Guidelines

Recommended temperature ranges for cooling and heating operations.

Cleaning the Air Conditioner

Indoor Unit Maintenance

Instructions for cleaning the indoor unit, front panel, and air filters.

Outdoor Unit Maintenance

Guidance on cleaning the outdoor unit and its drain pipe.

Troubleshooting

Common Symptoms and Checks

Identifying common issues and performing basic checks before calling for service.

Remote Control and Unit Malfunctions

Troubleshooting issues with the remote control, indicators, and unit operation.

Error Code Retrieval

Procedure for retrieving and understanding error codes displayed by the unit.

Information

Disposal and Battery Information

Information on the collection and disposal of old equipment and batteries.

Symbol Explanations

Explanation of various warning and information symbols used in the manual.

Summary

Quick Guide

Inserting Batteries

Instructions for inserting batteries into the remote control.

Clock Setting

Procedure for setting the current time on the remote control.

Basic Operation

Starting, Stopping, and Mode Selection

How to start, stop, and choose the operation mode of the air conditioner.

Temperature Adjustment

Steps to set the desired temperature using the remote control.

Safety Precautions

Unit and Remote Control Safety

Safety guidelines for indoor/outdoor units and the remote control.

Power Supply and Operational Safety

Precautions for power supply, unit operations, and environmental factors.

Flammable Refrigerant Safety

Safety measures for handling flammable refrigerant (R32) and system integrity.

Installation and Servicing Safety

Safety procedures for installing, servicing, and maintaining the unit.

Refrigerant Handling and Decommissioning

Safe methods for refrigerant removal, charging, and decommissioning.

How to Use

Airflow and Fan Settings

Adjusting airflow direction, fan speed, and quiet operation modes.

Powerful;Eco and Sleep Modes

Using powerful, eco-saving, and sleep modes for comfort and efficiency.

Timer Operation

Setting the timer to turn the unit on or off at specific times.

To Learn More...

Operation Modes and Settings

Detailed explanation of operation modes, energy saving temperatures, and airflow.

Auto Restart Control

Information on how the unit restarts after a power failure.

Operating Conditions

Temperature Range Guidelines

Recommended temperature ranges for cooling and heating operations.

Cleaning the Air Conditioner

Indoor Unit Maintenance

Instructions for cleaning the indoor unit, front panel, and air filters.

Outdoor Unit Maintenance

Guidance on cleaning the outdoor unit and its drain pipe.

Troubleshooting

Common Symptoms and Checks

Identifying common issues and performing basic checks before calling for service.

Remote Control and Unit Malfunctions

Troubleshooting issues with the remote control, indicators, and unit operation.

Error Code Retrieval

Procedure for retrieving and understanding error codes displayed by the unit.

Information

Disposal and Battery Information

Information on the collection and disposal of old equipment and batteries.

Symbol Explanations

Explanation of various warning and information symbols used in the manual.

This document describes the Panasonic Air Conditioner, an appliance designed for climate control in residential and commercial settings. It supports both single-split and multi-split systems, offering flexibility in installation and usage.

Function Description:

The Panasonic Air Conditioner provides cooling, heating, dry, and fan-only modes to maintain desired indoor temperatures and air circulation. It incorporates advanced features for energy efficiency and user comfort. The unit can be operated individually or simultaneously in multi-split configurations, with priority given to the first unit turned on. It also includes an auto-restart control that resumes operation with the last settings after a power failure.

Important Technical Specifications:

The operating conditions for the air conditioner are specified by Dry Bulb Temperature (DBT) and Wet Bulb Temperature (WBT) for both indoor and outdoor units.

For COOL mode:

Indoor Unit: Max DBT 32 °C (89.6 °F), Max WBT 23 °C (73.4 °F); Min DBT 16 °C (60.8 °F), Min WBT 11 °C (51.8 °F).
Single Split Outdoor Unit (CU-RZ60XKR, CU-RZ71XKR, CU-RZ80XKR): Max DBT 46 °C (114.8 °F), Max WBT 26 °C (78.8 °F); Min DBT -10 °C (14.0 °F).
Multi Split Outdoor Unit (CU-4Z71VBR, CU-4Z80VBR, CU-5Z100VBR): Max DBT 46 °C (114.8 °F), Max WBT 26 °C (78.8 °F); Min DBT -10 °C (14.0 °F).

For HEAT mode:

Indoor Unit: Max DBT 30 °C (86.0 °F); Min DBT 16 °C (60.8 °F).
Single Split Outdoor Unit (CU-RZ60XKR, CU-RZ71XKR, CU-RZ80XKR): Max DBT 24 °C (75.2 °F), Max WBT 18 °C (64.4 °F); Min DBT -15 °C (5.0 °F).
Multi Split Outdoor Unit (CU-4Z71VBR, CU-4Z80VBR, CU-5Z100VBR): Max DBT 24 °C (75.2 °F), Max WBT 18 °C (64.4 °F); Min DBT -16 °C (3.2 °F).

The device uses a flammable refrigerant, indicated by a warning symbol. It is crucial to handle the refrigerant with care to prevent ignition in case of leakage.

Usage Features:

The air conditioner is controlled via a remote control unit.

Basic Operation:
- ON/OFF: Press the "OFF/ON" button to start/stop the unit.
- Mode Selection: Use the "MODE" button to select AUTO, HEAT, COOL, DRY, or FAN modes.
  - In AUTO mode, the unit selects an operation mode based on room temperature (every 10 minutes for single-split, every 3 hours for multi-split).
  - In HEAT mode, the POWER indicator blinks during initial warm-up.
- Temperature Setting: Use "TEMP UP" and "TEMP DOWN" buttons to adjust the desired temperature. Recommended energy-saving ranges are 20.0 °C ~ 24.0 °C (68 °F ~ 75 °F) for HEAT and 26.0 °C ~ 28.0 °C (79 °F ~ 82 °F) for COOL.
Airflow Direction:
- The remote control allows adjustment of both upper/down and lateral airflow directions.
- In COOL/DRY mode, the horizontal flap swings automatically and fixes at an upper position once the temperature is achieved.
- In HEAT mode, the horizontal flap is fixed at a predetermined position, and the vertical flap swings left/right as temperature rises.
- Do not manually adjust the flap.
Fan Speed and Quiet Condition:
- FAN SPEED: When AUTO FAN is selected, the fan speed adjusts automatically. Users can also select specific fan speeds.
- QUIET: This operation reduces airflow noise.
POWERFUL/ECO Modes:
- POWERFUL: Quickly reaches the desired temperature (stops automatically after 20 minutes).
- ECO: Reduces power consumption for energy saving without sacrificing comfort.
Sleep Mode: Maximizes comfort while sleeping by automatically adjusting the sleep pattern temperature during activation. The indoor unit indicator dims, and the operation is activated for 0.5, 1, 2, 3, 4, 5, 6, 7, 8, or 9 hours.
Timer Setting: Allows users to set an ON or OFF timer for the unit at 2 different preset times.
Remote Control Features: The remote control has indicators for POWER, TIMER, and ECO. It also includes buttons for SET, CHECK, CLOCK, and RESET. The remote control can be restored to default settings by pressing the "RESET" button.

Maintenance Features:

Regular cleaning and maintenance are essential for optimal performance and longevity of the air conditioner.

Indoor Unit:
- Front Panel: Wash gently and dry. To remove the front panel, raise it up, slide the front panel to the right, and pull it out. Match and push in to close.
- Air Filters: Clean once every 2 weeks. Wash/rinse the filters gently with water to avoid damaging the surface. Dry the filters thoroughly under shade, away from direct sunlight. Replace any damaged filters.
- Anti-bacterial Filter: Clean whenever necessary by washing/rinsing gently with water. Dry thoroughly under shade. Replace every 10 years or any damaged filter (Part no.: CZ-SA22P).
- General Cleaning: Wipe the unit gently with a soft and dry cloth. The coils and fans should be cleaned periodically by an authorized dealer.
Outdoor Unit:
- Clean debris that surrounds the unit.
- Clear any blockage from the drain pipe.
Troubleshooting: The manual provides a comprehensive troubleshooting guide for common issues, including power indicator blinks, operation delays, abnormal temperatures, and unusual noises. It also outlines checks to perform before calling for service, such as verifying power, remote control functionality, and filter cleanliness.
Seasonal Inspection: Conduct a seasonal inspection after an extended period of non-use. Check for obstructions around air inlets/outlets and battery condition.
Non-Serviceable Criteria: The manual specifies conditions under which the unit should not be serviced by the user, such as abnormal noise, water/foreign particles in the remote control, water leakage, circuit breaker issues, power cord damage, or non-functioning switches/buttons. In such cases, an authorized dealer should be consulted.
Refrigerant Handling: The manual provides detailed safety precautions for handling flammable refrigerants, including procedures for removal, recovery, charging, and labelling. It emphasizes the importance of using trained and certified service personnel for any work involving the refrigerant circuit.

Safety Precautions:

The manual outlines extensive safety precautions to prevent personal injury, property damage, and ensure safe operation.

General Warnings: Includes warnings for electrical shock, fire, and injury. It advises against self-repair and emphasizes the use of authorized dealers for service.
Indoor Unit and Outdoor Unit: Prohibits installation by children, warns against using the unit for purposes other than its intended use, and advises against cleaning with water or volatile substances. It also warns against touching the outdoor unit during lightning and exposing oneself to cold air for prolonged periods.
Power Supply: Advises against modifying the power cord, sharing the same power outlet with other equipment, operating with wet hands, or pulling the cord to unplug. It also provides guidance on checking for abnormalities in the power plug, circuit breaker, and wiring.
Flammable Refrigerant: Contains specific warnings for units using flammable refrigerants (R32, R410A, R22). It details precautions for installation, servicing, and disposal, emphasizing the need for adequate ventilation, avoiding ignition sources, and using certified personnel.
Installation (Space): Specifies minimum room area requirements for units with flammable refrigerants and guidelines for pipe-work installation to prevent physical damage and ensure proper ventilation.
Servicing: Outlines requirements for service personnel to be trained and certified, ensuring proper refrigerant charge, and minimizing ignition risks during work on systems containing flammable refrigerants. It also advises on working in well-ventilated areas and using appropriate protective equipment.
Removal and Evacuation: Provides detailed steps for removing refrigerant from the circuit, including the use of recovery cylinders, vacuum pumps, and proper handling of recovered refrigerant. It also warns about electrostatic charge during charging/discharging.
Labelling: Requires equipment to be labelled indicating its decommissioning, refrigerant content, and date.
Recovery: Details procedures for safe refrigerant recovery, including the use of appropriate recovery cylinders, weighing scales, and leak-free disconnect couplings. It also specifies precautions for handling compressors and compressor oils.

The Panasonic Air Conditioner is designed for optimal performance and safety, provided that all installation, usage, and maintenance guidelines are strictly followed.