To Next PageTo Next PageWhat does error code H12 mean on my Panasonic cs-s9pkv?
If your Panasonic Air Conditioner displays error code H12, it signifies that the indoor unit and outdoor capacity rank are mismatched. This is due to wrong models being interconnected. To resolve this, check the models of the indoor and outdoor units.
What to do if the Panasonic Air Conditioner remote control does not work?
If the remote control for your Panasonic Air Conditioner isn't working, ensure the batteries are inserted correctly and replace weak batteries.
What to do if Panasonic Air Conditioner unit does not receive the signal from the remote control?
If your Panasonic Air Conditioner unit isn't receiving the signal from the remote control, ensure that the transmitter is not obstructed. Certain fluorescent lights may also interfere with the signal.
How to fix a noisy Panasonic cs-s9pkv Air Conditioner?
If your Panasonic Air Conditioner is noisy during operation, check if the unit has been installed at an incline. Also, make sure the front panel is closed properly.
What to do if my Panasonic cs-s9pkv Air Conditioner shows error code F95?
If your Panasonic Air Conditioner displays error code F95, it indicates a cooling high pressure protection issue. This is caused by a problem in the outdoor refrigerant circuit. To resolve this, inspect and repair the outdoor refrigerant circuit.
What to do if my Panasonic cs-s9pkv displays error code F91?
If your Panasonic Air Conditioner displays error code F91, it indicates a refrigeration cycle abnormality, usually caused by refrigerant shortage due to a leak. You should check for refrigerant leaks and recharge the system if necessary.
What does error code H28 mean on my Panasonic Air Conditioner?
If your Panasonic Air Conditioner displays error code H28, it indicates an outdoor heat exchanger temperature sensor abnormality caused by faulty sensor. Check or replace the outdoor heat exchanger temperature sensor.
What does error code H11 mean on a Panasonic Air Conditioner?
If your Panasonic Air Conditioner displays error code H11, it indicates a faulty indoor unit PCB, caused by a wrong indoor unit PCB. You should check the indoor unit PCB.
What does error code H59 mean on Panasonic cs-s9pkv Air Conditioner?
If your Panasonic Air Conditioner displays error code H59, it indicates an ECONAVI sensor abnormality. This happens when the feedback signal is fixed at 0 VDc or 5 VDc continuously for 25 seconds during ECONAVI operation. To fix this, check or replace the ECONAVI sensor.
What does error code H33 mean on my Panasonic Air Conditioner?
If your Panasonic Air Conditioner displays error code H33, it indicates a signal transmission error due to wrong wiring. This is caused by wrong models interconnected. You should check the wiring connections between the indoor and outdoor units.
General| Brand | Panasonic |
|---|---|
| Model | cs-s9pkv |
| Category | Air Conditioner |
| Language | English |
