Unit CS-SA9CKP CU-SA9CKP5
Compressor Type — Rotary(1 cylinder)
Rolling piston type
Motor Type — Induction(2 pole)
Rated Output W — 750
Air Circulation Type Cross-flow Fan Propeller fan
Motor Type Induction (4 pole) Induction (6 pole)
Input W — 58.6
Rate Output W 13 20
Fan Speed Low rpm 900 —
Medium rpm 1040 —
High rpm 1180 705
Heat Exchanger Discription Evaporator Condenser
Tube Material copper copper
Fin Type slot type Corrugation type
Rows / Stage (Plate fin configuration, forced draft)
2×15 1×19
FPI 18 19
Dimensions mm 610 × 315 × 25.4 706.2 × 482.6 × 22
Refrigerant Control Device — Capillary Tube
Refrigeration Oil (c.c) — SUNISO 4GDID or ATMOS M60
(350)
Refrigerant (R-22) g — 840
Thermostat Electronic Control —
Protection Device — Overload Protector
Capillary Length mm — Cooling: 470, Heating: 1160
Circulation L/min — Cooling: 13.4, Heating: 4.5
Inner dia mm — Cooling:1.5, Heating: 1.2
Air Filter P.P Honeycomb —
Refrigerant Circulation Control Device Capillary
Compressor Capacitor µFV — 25µF, 370V
Fan Motor Capacitor µFV — 1.2µF, 400V
•
• •
•
Specifications are subject to change without notice for further improvement
•
• •
•
The amount of refrigerant (60g) for air purging not included
6
CS-SA9CKP CU-SA9CKP5 / CS-SA12CKP CU-SA12CKP5
To Next Page