To Next PageTo Next PageWhy is my Panasonic Air Conditioner remote control not working?
If the remote control for your Panasonic Air Conditioner is not working, ensure the batteries are inserted correctly and replace weak batteries.
What to do if my Panasonic CS-TZ50ZKEW Air Conditioner doesn't receive the remote control signal?
If the Panasonic Air Conditioner unit does not receive the signal from the remote control, ensure that the receiver is not obstructed. Note that certain fluorescent lights may interfere with the signal transmitter; consult an authorised dealer.
How to improve the efficiency of HEAT/COOL mode on my Panasonic CS-TZ50ZKEW Air Conditioner?
If your Panasonic Air Conditioner isn't operating efficiently in HEAT/COOL mode, make sure you've set the temperature correctly. Close all doors and windows, clean or replace the filters, and clear any obstructions at the air inlet and outlet vents.
General| Cooling Capacity | 5.0 kW |
|---|---|
| Power Supply | 220-240 V, 50 Hz |
| Refrigerant | R32 |
| Dimensions (Outdoor Unit) | 619 x 824 x 299 mm |
| Weight (Outdoor Unit) | 35 kg |
| Type | Wall Mounted |
| Seasonal Coefficient of Performance (SCOP) | 4.0 |
Step-by-step instructions for inserting AAA or R03 batteries into the remote control.
Guide on how to set the time on the remote control, including 12-hour/24-hour format.
Explanation of warning symbols (WARNING, CAUTION) and compulsory actions.
Specific warnings for children, maintenance, installation, and environmental factors for units.
Guidelines for safe use of power cords, outlets, and preventing overheating or electric shock.
Precautions for cleaning, installation, and handling of unit parts to avoid damage or injury.
Safety guidelines for handling R32 refrigerant, including pressure and installation specifics.
Precautions for installing and operating in rooms with flammable refrigerants and ignition sources.
Requirements for service personnel and safety protocols before performing work on the system.
Procedures for detecting refrigerant leaks, presence of fire extinguishers, and avoiding ignition sources.
Procedure for removing refrigerant, purging with inert gas, and evacuating the system.
Requirements for charging refrigerant, including contamination prevention, grounding, and leak testing.
Guidelines for safely recovering refrigerant into designated cylinders, including equipment and scales.
Ensuring safe handling of refrigerants in recovery units and cylinders, and compressor oil management.
Step-by-step guide on how to use the remote control to retrieve error codes from the unit.
