R
Richard MillerSep 16, 2025
Why does the room smell peculiar when using my Panasonic CS-TZ9SKEW?
- KKayla KimSep 16, 2025
The room may have a peculiar odor due to a damp smell emitted by the wall, carpet, furniture, or clothing.
To Next PageTo Next PageWhy does the room smell peculiar when using my Panasonic CS-TZ9SKEW?
The room may have a peculiar odor due to a damp smell emitted by the wall, carpet, furniture, or clothing.
Why is the TIMER indicator always on in my Panasonic Air Conditioner?
The TIMER indicator on your Panasonic Air Conditioner remains on because the timer setting repeats daily once it has been set.
Why does my Panasonic Air Conditioner outdoor unit emit water or steam?
The water or steam emitted from the outdoor unit of your Panasonic Air Conditioner is due to condensation or evaporation occurring on the pipes.
Why my Panasonic CS-TZ9SKEW Air Conditioner unit does not work?
If your Panasonic Air Conditioner unit isn't working, check these: * Check if the circuit breaker is tripped. * Check if timers have been set.
Why does the POWER indicator blink before my Panasonic CS-TZ9SKEW Air Conditioner is switched on?
The POWER indicator blinks before the unit is switched on as a preliminary step in preparation for operation when the ON timer has been set.
Why are some plastic parts of my Panasonic CS-TZ9SKEW Air Conditioner discolored?
Discoloration is subject to material types used in plastic parts, accelerated when exposed to heat, sunlight, UV light, or environmental factors.
What causes a splashing sound during Panasonic CS-TZ9SKEW operation?
The splashing sound during the operation of your Panasonic Air Conditioner is due to the unit generating nanoe.
Why does airflow continue after stopping my Panasonic CS-TZ9SKEW?
The airflow continuing after your Panasonic Air Conditioner has stopped is due to the extraction of remaining heat from the indoor unit, which can take up to 30 seconds.
Why does the POWER indicator blink during HEAT mode with no warm air from my Panasonic CS-TZ9SKEW Air Conditioner?
The POWER indicator blinks during HEAT mode with no warm air supply because the unit is in defrost mode and AIR SWING is set to AUTO.
Why doesn't my Panasonic CS-TZ9SKEW remote control work?
If your Panasonic Air Conditioner remote control isn't working, it could be due to the following: * Insert the batteries correctly. * Replace weak batteries.
General| Cooling Capacity | 2.5 kW |
|---|---|
| Heating Capacity | 3.2 kW |
| Power Supply | 220-240 V, 50 Hz |
| Refrigerant | R32 |
| Energy Efficiency Class (Heating) | A |
