Panasonic CS-TZ9SKEW User Manual

12
Remote control display
To switch between
powerful & quiet
(Remote control display)
POWERFUL
QUIET
(NORMAL)
POWERFUL: To reach temperature quickly
• This operation stops automatically after
20 minutes.
QUIET: To enjoy quiet operation
•
This operation reduces airfl ow noise.
MODE
To select operation mode
AUTO mode - For your convenience
•
During operation mode selection, the power
indicator will blinks at initial.
Multi
• Unit selects operation mode every 3 hours
according to setting temperature, outdoor
temperature and room temperature.
HEAT mode - To enjoy warm air
•
Unit takes a while to warm up. The power
indicator will blinks at initial during this operation.
COOL mode - To enjoy cool air
•
To reduce power consumption during COOL mode,
use curtains to screen off sunlight and outdoor heat.
DRY mode - To dehumidify the environment
•
Unit operates at low fan speed to give a gentle
cooling operation.
SLEEP
To maximise comfort while
sleeping
(CANCEL)
• This operation provides you with a comfortable
environment while sleeping. It will automatically
adjust the sleep pattern temperature during the
activation period.
• The indoor unit indicator will dim when this
operation is activated. This is not applicable if the
indicator brightness has been manually dimmed.
• This operation is incorporated with the activation
timer (0.5, 1, 2, 3, 4, 5, 6, 7, 8 or 9 hours).
• This operation can be set together with single
timer or twin timer. Sleep operation has the
priority over OFF timer.
• This operation can be cancelled by pressing the
respective button when the sleep timer reaches 0.0h.
How to use
For TZ, MTZ indoor unit
Press to restore the
remote control to default
setting.
Press and hold for
approximately
10 seconds to show
temperature setting
in °C or °F.
Not used
in normal
operations.
CS-TZ9SKEW
CS-TZ12SKEW
CS-TZ15SKEW
CS-TZ18SKEW
CS-MTZ5SKE
CS-MTZ7SKE
CS-TZ24SKEW
Remote control receiver
and indicator
POWER
(Green)
TIMER
(Orange)
To adjust horizontal
airfl ow direction
• Manually
adjustable.
( CS-TZ9SKEW,
CS-TZ12SKEW,
CS-TZ15SKEW,
CS-TZ18SKEW,
CS-MTZ5SKE,
CS-MTZ7SKE)
Auto OFF/ON button
Use when remote control is misplaced or a
malfunction occurs. Raise the front panel:
• To use in AUTO mode, press the button once.
• To use in COOL mode, press and hold the
button until 1 beep is heard, then release.
• To use in HEAT mode, press and hold the
button until 1 beep is heard, then release. And
press again until 2 beeps, then release.
• Press the button again to turn off.
ON
OFF
SET
TIMER
CANCEL
AIR SWING
TEMP
MODE
SLEEP
FAN SPEED
OFF/ON
OFF/ON
ON
OFF
SET
TIMER
CANCEL
OFF/ON
AIR SWING
TEMP
OFF/ON
MODE
SLEEP
FAN SPEED
ON
O
FF
S
ET
TIMER
C
AN
C
E
L
TEMP
O
FF/
ON
ON
O
FF
S
ET
TIMER
C
AN
C
E
L
TEMP
O
FF/
ON
Multi
Multi split system
Press and hold for
approximately 5 seconds
to show 12-hour (am/pm)
or 24-hour time indication.

Panasonic CS-TZ9SKEW Specifications

General

Brand	Panasonic
Model	CS-TZ9SKEW
Category	Air Conditioner
Language	English