4
Quick guide
For Z, XZ, MZ indoor unit
1
2
3
Inserting the batteries
1
Pull out the back cover of remote control
2
Insert AAA or R03 batteries
(can be used ~ 1 year)
3
Close the cover
ON
OFF
TIMER
CANCEL
SET
ET
1
2
3
8m
Basic operation
1
Select the desired mode
DRY
AUTO HEAT
COOL
2
Start/stop the operation
POWER
• Please note that the indication is on display to start the
unit.
3
Select the desired temperature
• Selection range:
16 °C ~ 30 °C.
•
Operating the unit within the recommended temperature range
may save energy.
HEAT : 20 °C ~ 24 °C.
COOL: 26 °C ~ 28 °C.
DRY : 1 °C ~ 2 °C lower than room temperature.
• To dim or restore the unit’s indicator brightness, press and hold
for 5 seconds.
• Use remote control within 8 m from the remote control receiver of the
indoor unit.
The illustrations in this manual are for explanation purposes only and may differ from the actual unit.
They are subject to change without notice for future improvement.