Heat Exchanger Description Evaporator Condenser
Tube material Copper Copper
Fin material Aluminium Aluminium
Fin Type Slit Fin Louver Fin
Row / Stage (Plate fin configuration, forced draft)
(A) 2 × 15 (B) 2 × 15 2×24
FPI 21 19 14
Size (W × H × L) mm 610 × 315 × 25.4 756
719.5
× 609.6 × 44
Refrigerant Control Device — Capillary Tube
Refrigeration Oil (c.c) — SUNISO 4GDID or ATMOS
M60 (330, 330)
Refrigerant (R410A) g(oz) — (A) 1,050 (37.0)
(B) 860 (30.3)
Thermostat Electronic Control —
Protection Device — Overload Protector
Capillary Tube Length mm — (A) 1,160 (B) 810
Flow Rate l/min — (A) 10.5 (B) 7.0
Inner Diameter mm — (A) 1.6 (B) 1.3
Air Filter Material
Style
(c.c) P.P.
Honeycomb
—
Capacity Control Capillary Tube
Compressor Capacitor µF, VAC — (A) 35 µF, 370 VAC
(B) 25 µF, 370 VAC
Fan Motor Capacitor µF, VAC 1.5 µF, 400 VAC 3.0 µF, 450 VAC
• Specifications are subject to change without notice for further improvement.
13
CS-V9BKPG CU-2V14BKP5G / CS-V9BKPG CU-2V18BKP5G / CS-V9BKP G CU-3V20BKP5G / CS-V7BKP G CU-2V19BKP5G / CS-V12BKPG
To Next Page
Loading...
