8.2. Cooling Operation
•
Cooling operation can be set using remote control.
•
This operation is applied to cool down the room temperature reaches the setting temperature set on the remote control.
•
The remote control setting temperature, which takes the reading of intake air temperature sensor, can be adjusted from 16°C
to 30°C.
•
During cooling operation, the compressor will stop running and restart as shown in below figure.
8.2.1. Cooling Operation Time Diagram
21
CS-W7DKE CU-W7DKE / CS-W9DKE CU-W9DKE / CS-W12DKE CU-W12DKE
To Next Page
Loading...
