4
� Operation Details
Auto, Heat, Cool, Dry, Fan
2
, Quiet and Ion operations could be activated in all
button again to stop the operation.
To save electricity, close the curtains when using air conditioner to prevent sunl
ight and heat from coming in.
Approximately 10% of electricity can be saved if you set the temperature 1
gher in cooling operation or 2
If you wish to have the cool air blowing directly on you, set the airfl ow direction downward but not for an excessive length of time,
as it may harm your health.
The room has a peculiar odour.
This may be a damp smell emitted by the wall, carpet, furniture or clothing
This may be a damp smell emitted by the wall, carpet, furniture or clothing
Air conditioner does not cool or heat effi ciently.
Ensure the temperature has been set correctly.
ure fi lters are cleaned or replaced when necessary.
Ensure inlet and outlet vents of
units have not been obstructed.
Enables you to enjoy the cooling
effect at your preferred setting
The range of temperature can be
Enables you to set the desired
temperature at low fan speed which
provides you with the dehumidifying
The range of temperature can be
DRY - Soft Dry Operation
AUTO - Automatic Operation
The unit will automatically select
the operation mode according
to the setting, outdoor and room
selection, power indicator blinks.
For every 30 minutes, the operation
The range of temperature can be
Enables you to enjoy the warming
effect at your preferred setting
For cold air prevention, air might
not blow out immediately and
power indicator blinks when
Also operates in defrost mode
(maximum 10 minutes) where by
the power indicator blinks. The
melted frost is drained at outdoor
unit and indoor fan is stopped.
The range of temperature can be
Fan operation to circulate a
FAN - Air Circulation Operation
AUTO
HEAT
FAN
DRY
COOL
To Next Page
Loading...
