12
How to Use
Indicators
To adjust airfl ow direction To adjust airfl ow direction
Upper direction
Lateral direction
• Do not adjust the fl ap by hand.
* For details operation, refer “To Learn More....”
Not used
in normal
operation.
Press to restore the
remote control to
default setting.
Press to turn
the Wireless
LAN feature
ON or OFF.
To enjoy fresher and cleaner environment
• This operation combines both nanoe™X and
nanoe™-G (nanoe™ TECHNOLOGY).
• nanoe™ TECHNOLOGY automatically starts when
the unit is turned on.
• Press
to turn ON or OFF this operation
manually.
• This operation can be activated even when the unit
is OFF. Note that the fl ap and fan speed will operate
according to the remote control setting.
• If a power failure occurs during this operation,
this operation resumes immediately when power
resumes.
To reduce power consumption
• To reduce power consumption for better energy
saving without sacrifi cing comfort.
To adjust FAN SPEED and QUIET condition
FAN SPEED:
• When FAN AUTO is selected, the fan speed is
adjusted automatically according to the operation
mode.
• Select the lowest fan speed (
) to have a low noise
operation.
• When iAUTO-X mode is selected, the fan speed is
automatically set to AUTO. To adjust the fan speed,
cancel iAUTO-X mode.
QUIET:
• This operation reduces airfl ow noise.
To Next Page
Loading...
