To Next PageTo Next PageWhat does error code H15 mean on my Panasonic CS-YS9PKV Air Conditioner?
Error code H15 on your Panasonic Air Conditioner indicates an abnormality with the compressor temperature sensor. The issue might stem from a faulty connector connection (check and repair any faulty connections), a faulty sensor (replace the compressor temperature sensor), or a faulty PCB (replace the PCB).
What does error code H23 mean on my Panasonic CS-YS9PKV Air Conditioner?
Error code H23 on your Panasonic Air Conditioner indicates an abnormality with the indoor heat exchanger temperature sensor. This could be due to a faulty connector connection (check and repair any faulty connections), a faulty sensor (replace the indoor heat exchanger temperature sensor), or a faulty PCB (replace the PCB).
What does error code H27 mean on my Panasonic Air Conditioner?
Error code H27 on your Panasonic Air Conditioner indicates an issue with the outdoor air temperature sensor. This can be caused by a faulty connector connection (check and repair any faulty connections), a faulty sensor (replace the outdoor air temperature sensor), or a faulty PCB (replace the PCB).
What does error code H28 mean on my Panasonic Air Conditioner?
Error code H28 on your Panasonic Air Conditioner indicates an abnormality with the outdoor heat exchanger temperature sensor. This can be due to a faulty connector connection (check and repair any faulty connections), a faulty sensor (replace the outdoor heat exchanger temperature sensor), or a faulty PCB (replace the PCB).
General| Type | Split System |
|---|---|
| Cooling Capacity | 2.5 kW |
| Heating Capacity | 3.2 kW |
| Refrigerant | R32 |
| Power Supply | 220-240V, 50Hz |
Essential safety guidelines for handling electrical components and refrigerant.
Detailed technical specifications for all models, including electrical and physical data.
Identifies controls, indicators, and sensors on the indoor unit.
Explains the buttons, display, and operational modes of the remote control.
Guidance on choosing optimal locations for indoor and outdoor units for performance and safety.
Step-by-step procedures for mounting and connecting the indoor unit.
Step-by-step procedures for installing the outdoor unit and connecting piping.
Overview of inverter control, thermostat, and basic functions.
Intelligent modes for energy saving and enhanced user comfort.
Safety features like restart delay, current limits, and overheating protection.
Controls for low pressure, gas leakage, and preventing ice formation.
How to access and interpret unit self-diagnosis error codes.
Table listing error codes, their causes, and troubleshooting steps.
Step-by-step guides for diagnosing and resolving common malfunctions.
Procedures for disassembling indoor unit components for repair or maintenance.
Performance data graphs showing capacity, current, and pressure vs. temperature/length.
Exploded diagrams and lists for identifying indoor unit replacement parts.
Exploded diagrams and lists for identifying outdoor unit replacement parts.
