Panasonic CT-27D11E - PIP Operation with a VCR - No Cable Box

2 TUNERPIP OPERATIONWITHA VCR - NO CABLEBOX
2 Tuner PIP Operation with a VCR - No Cable Box
Note: Refer to theFEATURE COMPARISON CHART on page 3 foryour television PIP capability.
This television includes a two tuner Picture In Picture (PIP) feature. This allows
watching two (2) live broadcasts at the same time without or with an external video
source (VCR).
Connect your television to a VCR, as shown.
CONNEC_ONS ON BACK OF "rv
v_
Note: The Remote Control must be programmed with the supplied codes to operate the VCR. See
Programming the Remote Control in the Remote Control Quick Reference Guide.
Procedure
Press the PIP button on the Remote Control to display the PIP frame on screen.
Note: The audio is from the Main Picture only.
To view an external video source in the PIP frame:
1. Press the TV/VlDEO button on the Remote Control to select the same video input to
which your VCR is connected.
2. Verify the VCR is on.
3. Choose channels for the Main Picture by pressing the TV button on the Remote
Control and using the numeric keypad or OH up/down button.
4. Choose channels for the PIP frame by pressing the TV button on the Remote Control
and using the PIP Channel up/down buttons.
__,F_./_ SWAP and RECALL Buttons
The SWAP button switches the PIP and
Main Picture source. Press the RECALL
button for on screen PIP and Main Picture
source status.
[]