C
Crystal LynchSep 12, 2025
Why does the indoor fan stop during heating operation of Panasonic CU-5E34PBE?
- BBilly AdamsSep 12, 2025
The indoor fan stops occasionally during heating operation to avoid an unintended cooling effect.
To Next PageTo Next PageWhy does the indoor fan stop during heating operation of Panasonic CU-5E34PBE?
The indoor fan stops occasionally during heating operation to avoid an unintended cooling effect.
What is the water flowing sound coming from my Panasonic Air Conditioner?
The water flowing sound during the operation of your Panasonic Air Conditioner is due to the flow of refrigerant inside the unit.
Why does airflow continue after stopping my Panasonic Air Conditioner?
The airflow continuing after your Panasonic Air Conditioner has stopped is due to the extraction of remaining heat from the indoor unit, which can take up to 30 seconds.
How to improve the efficiency of HEAT/COOL mode on my Panasonic CU-5E34PBE Air Conditioner?
If your Panasonic Air Conditioner's HEAT/COOL mode isn't working efficiently, make sure you've set the temperature correctly. Ensure all doors and windows are closed. Clean or replace the filters, and clear any obstructions at the air inlet and outlet vents.
What causes a cracking sound in Panasonic CU-5E34PBE during operation?
The cracking sound you hear during the operation of your Panasonic Air Conditioner is due to temperature changes causing the expansion and contraction of the unit.
Why does the POWER indicator blink during HEAT mode in my Panasonic CU-5E34PBE?
If the POWER indicator blinks during HEAT mode with no warm air supply and the louver is closed on your Panasonic Air Conditioner, the unit is in defrost mode, and AIR SWING is set to AUTO.
Why does my Panasonic Air Conditioner's indoor fan stop sometimes when heating?
The indoor fan in your Panasonic Air Conditioner stops occasionally during heating operation to prevent unintended cooling.
Why TIMER indicator is always on Panasonic Air Conditioner?
The TIMER indicator on your Panasonic Air Conditioner remains on because the timer setting repeats daily once it has been set.
Why does the POWER indicator blink on my Panasonic CU-5E34PBE before it turns on?
The POWER indicator on your Panasonic Air Conditioner might blink before the unit is switched on as a preliminary step in preparation for operation when the ON timer has been set. When the ON Timer is set, the unit may start earlier (up to 35 minutes) before the actual set time in order to achieve the desired temperature on time.
Why does the indoor fan stop on my Panasonic Air Conditioner during automatic fan speed setting?
The indoor fan of your Panasonic Air Conditioner stops occasionally during automatic fan speed setting to help remove surrounding odors.
Provides instructions for operating the air conditioner in English.
Warnings for personal injury, property damage, and prohibited actions.
Safety guidelines for remote control and Network Adaptor usage.
Specific cautions for unit care, placement, and environmental factors.
Risks associated with flammable R32 refrigerant and ignition sources.
Specific procedures and tools for R32, and refrigerant recovery.
Knowledge required for handling flammable refrigerants and compliance.
Guidelines for service personnel and work safety.
Acceptable methods for detecting refrigerant leaks.
Checks for electrical components, refrigerant charge, and markings.
Safety during repairs to sealed and intrinsically safe components.
Approved methods for detecting refrigerant leaks, including sensitivity.
Steps and precautions for charging the system with refrigerant.
Labelling de-commissioned units and safe refrigerant recovery practices.
Explanation of warning and caution symbols used in the manual.
Precautions related to power cords and connections to prevent hazards.
Requirements for installation area and ventilation to prevent fire.
Requirements for trained and certified personnel for servicing.
Ensuring safe installation, piping, and protection against damage.
Precautions for working in confined spaces and preventing ignition.
Use of fire extinguishers, ignition source control, and ventilation needs.
Initial safety checks for electrical components before repair.
Procedures for safely removing and evacuating refrigerant.
Steps for safely decommissioning the unit.
Provides instructions for operating the air conditioner in English.
Warnings for personal injury, property damage, and prohibited actions.
Safety guidelines for remote control and Network Adaptor usage.
Specific cautions for unit care, placement, and environmental factors.
Risks associated with flammable R32 refrigerant and ignition sources.
Specific procedures and tools for R32, and refrigerant recovery.
Knowledge required for handling flammable refrigerants and compliance.
Guidelines for service personnel and work safety.
Acceptable methods for detecting refrigerant leaks.
Checks for electrical components, refrigerant charge, and markings.
Safety during repairs to sealed and intrinsically safe components.
Approved methods for detecting refrigerant leaks, including sensitivity.
Steps and precautions for charging the system with refrigerant.
Labelling de-commissioned units and safe refrigerant recovery practices.
Explanation of warning and caution symbols used in the manual.
Precautions related to power cords and connections to prevent hazards.
Requirements for installation area and ventilation to prevent fire.
Requirements for trained and certified personnel for servicing.
Ensuring safe installation, piping, and protection against damage.
Precautions for working in confined spaces and preventing ignition.
Use of fire extinguishers, ignition source control, and ventilation needs.
Initial safety checks for electrical components before repair.
Procedures for safely removing and evacuating refrigerant.
Steps for safely decommissioning the unit.
General| Type | Air conditioner outdoor unit |
|---|---|
| Ionizer | - |
| Multi-split | Yes |
| Product color | White |
| Hose length (max) | 80 m |
| Air conditioner functions | Cooling, Heating |
| Cooling capacity in watts (max) | - W |
| Operating temperature (cooling) (T-T) | -10 - 46 °C |
| Operating temperature (heating) (T-T) | -15 - 24 °C |
| Seasonal efficiency rating (cooling) (SEER) | 6.5 |
| Seasonal efficiency rating (heating) (SCOP) (Average heating season) | 4 |
| Hourly energy consumption (cooling) | - kWh |
| Indoor unit width | - mm |
| Outdoor unit depth | 340 mm |
| Outdoor unit width | 940 mm |
| Outdoor unit height | 999 mm |
| Outdoor unit weight | 81000 g |
| Outdoor units quantity | 1 |
| Outdoor unit noise level | 54 dB |
