Panasonic CU-A120KE - Page 4

CS-A70KE
Functions
Indoor Unit
AUTO
TEST RUN
Power Switch OFF / ON ‘i
OFF
ane Temporary Operation Switch
¢ Used when the remote control cannot be
used.
Remote Control Signal Receiving
Sound Control
* It can be controlled by pressing Temporary
Operation Switch for 10 seconds.
OfF/ON | Operation Test Running / Pump
Down Switch
Lo |
¢ Used when test running or servicing.
|} Operation Indication Lamps (LED)
¢ POWER (Red)...... Lights up in operation
Blinks in Automatic
Operation Mode judging
and Hot Start operation
* SLEEP (Orange)..... Lights up in Sleep
Mode Operation
© TIMER (Orange)..... Lights up in Timer
Setting
+——_ Operation Mode
¢ Heating, Cooling, Soft Dry and Automatic
Mode.
—_ Time Delay Safety Control
¢ Restarting is inhibited for appro. 3 or 4
minutes.
7 Minutes Time Save Control
¢ Cooling Operation only.
Auto Restart Control
¢ Operation is restarted after power failure
at previous setting mode.
Anti-Freezing Control
¢ Anti-Freezing control for indoor heat
exchanger. (Cooling and Soft Dry)
Hot-Start Control
¢ The indoor fan stops until the indoor heat
exchanger temperature over 30°C.
* The indoor fan operates at SLo and Lo”
when indoor heat exchanger temperature
reaches 30°C ~ 41°C.
¢ Hot Start is completed when indoor heat
exchanger reaches 41°C.
Sleep Mode Auto Control
¢ The operation starts at SLo speed and
stops after 8 hours.
—— indoor Fan Speed Control
¢ High, Medium and Low.
« Automatic Fan Speed Mode
— Heating : Fan speed varies from Me
~>SLo in accordance with
indoor heat exchanger.
— Cooling : Fan rotates at Hi and Me speed.
Deodorizing control is available.
— Soft Dry : Fan rotates at SLo speed.
Deodorizing control is available.
——s
— Airflow Direction Control
* Automatic air swing and manual adjusted
by remote control for vertical airflow.
* Manually adjusted by hand for horizontal
airflow.