To Next PageTo Next PageWhat happens if the Panasonic CU-A12DKD compressor is not compressing sufficiently?
If the Panasonic Air Conditioner's compressor is not compressing efficiently, the electric current during operation will be approximately 20% lower than the normal value. Additionally, the compressor's discharge tube will become abnormally hot, typically between 70 to 90°C. The difference between high and low pressure will also be almost zero.
General| Type | Split System |
|---|---|
| Inverter | Yes |
| Power Supply | 220-240V, 50Hz |
| Cooling Capacity | 3.5 kW |
| Energy Efficiency Ratio (EER) | 3.5 |
| Outdoor Unit Dimensions (W x H x D) | 780 x 540 x 285 mm |
Explains the functions of the remote control, including operation modes, fan speed, and timer settings.
Technical specifications for the CS-A7DKD indoor and CU-A7DKD outdoor units.
Technical specifications for the CS-A9DKD indoor and CU-A9DKD outdoor units.
Technical specifications for the CS-A12DKD indoor and CU-A12DKD outdoor units.
Provides dimensions for the indoor unit and its remote control transmitter and holder.
Details the dimensions for the outdoor units CU-A7DKD/CU-A9DKD and CU-A12DKD.
Shows the block diagram for the CS-A7DKD and CS-A9DKD models.
Presents the block diagram for the CS-A12DKD model.
Details on heating operation and its time diagram.
Details on cooling operation and its time diagram.
Details on soft dry operation and its time diagram.
Covers restart, compressor protection, time save, anti-freezing, anti-dew, deicing, etc.
Explains Automatic, Heating, Cooling, and Soft Dry operations.
Lists safety warnings, cautions, prohibited actions, and required installation tools.
Guides on selecting installation locations and electrical connection precautions.
Step-by-step guide for evacuating air from the indoor unit and pipes.
Detailed steps for purging air from the piping and indoor unit during installation.
Detailed steps for evacuating the system during initial installation.
Instructions for charging the system with the correct amount of refrigerant.
Step-by-step guide to remove the indoor electronic controller unit.
Analyzes refrigeration cycle parameters for diagnosing malfunctions.
Relates AC conditions to pressure and electric current readings for diagnosis.
Methods to diagnose faults in the compressor and the 4-way valve.
Provides thermostat characteristic curves for Cooling, Soft Dry, and Heating operations.
Presents the first part of the electronic circuit diagram for indoor and outdoor units.
