To Next PageTo Next PageWhat to do if my Panasonic Air Conditioner remote control does not work?
If the remote control for your Panasonic Air Conditioner isn't working, make sure you have inserted the batteries correctly or try replacing weak batteries.
What to do if my Panasonic Air Conditioner stops and the TIMER indicator blinks?
If your Panasonic Air Conditioner stops and the TIMER indicator blinks, use the remote control to retrieve the error code.
How to improve HEAT/COOL mode efficiency in my Panasonic CU-E28PKR Air Conditioner?
If your Panasonic Air Conditioner isn't working efficiently in HEAT/COOL mode, try the following: * Ensure the temperature is set correctly. * Close all doors and windows to maintain the desired temperature. * Clean or replace the filters for optimal airflow. * Clear any obstructions from the air inlet and outlet vents.
What to do if my Panasonic CU-E28PKR Air Conditioner unit does not receive the signal from the remote control?
If the Panasonic Air Conditioner unit isn't receiving the signal from the remote control, ensure that nothing is obstructing the receiver. Certain fluorescent lights may interfere with signal transmitter. Please consult authorised dealer.
General| Brand | Panasonic |
|---|---|
| Model | CU-E28PKR |
| Category | Air Conditioner |
| Language | English |
Lists indoor and outdoor unit model numbers for the air conditioner.
Highlights energy-saving features like ECONAVI and AUTO COMFORT for optimized comfort.
Step-by-step guide for inserting batteries into the remote control.
Instructions for setting the clock on the remote control for accurate timer functions.
Covers selecting modes, starting/stopping the unit, and setting temperature.
Explains safety symbols and provides warnings for unit operation, remote, and power.
Details specific precautions for preventing fire, electric shock, and unit damage.
Explains how ECONAVI optimizes energy consumption by detecting human activity.
Details on choosing between AUTO, HEAT, COOL, DRY, and FAN modes.
Describes the MILD DRY function for managing humidity during cooling.
How to switch between POWERFUL for quick temperature changes and QUIET for reduced noise.
Guide to selecting appropriate fan speeds for desired airflow.
Instructions for using the unit's manual ON/OFF button when the remote is lost.
Explains AUTO COMFORT for maintaining consistent room comfort based on presence.
Details on the NANOE-G function for purifying air and deactivating viruses/bacteria.
Guide to setting ON/OFF timers for automatic operation scheduling.
Instructions for controlling the louver's direction for optimal air distribution.
Explains how human activity and sunlight sensors optimize comfort and save energy.
Details on the sensor's scanning areas for heat source and movement detection.
Explains how the sunlight sensor detects intensity to save energy with ECONAVI.
Specifies the indoor and outdoor temperature ranges for optimal operation.
Safety and general advice before cleaning the unit, including prohibited cleaning agents.
Instructions for cleaning the indoor unit's front panel, sensor, and filters.
Guidance on cleaning the nanoe-G generator every six months.
Procedure for washing and drying air filters every two weeks.
Checklist for seasonal inspection and steps for extended non-use.
Lists common operating symptoms and their likely causes, not requiring service.
Troubleshooting steps to check before contacting a service agent.
Conditions requiring immediate power off and consultation with an authorized dealer.
Procedure to retrieve error codes using the remote control for diagnosis.
Information on the collection and disposal of old electrical equipment and used batteries.
