To Next PageTo Next PageWhat does H14 mean on my Panasonic Air Conditioner?
The H14 error in your Panasonic Air Conditioner indicates an abnormality with the indoor intake air temperature sensor. Possible causes are a faulty connector connection, a faulty sensor, or a faulty PCB.
Why is my Panasonic Air Conditioner showing F97 (Compressor Overheating)?
The F97 error on your Panasonic Air Conditioner indicates compressor overheating, which may be due to refrigerant shortage (refrigerant leakage), a closed 2/3 way valve, or a faulty compressor tank temperature sensor.
What causes the F98 error on a Panasonic CU-E24NKUA Air Conditioner?
The F98 error in your Panasonic Air Conditioner indicates an input over current detection. This can be caused by compressor failure, a defective outdoor unit PCB, a defective inverter main circuit electrolytic capacitor, or excessive refrigerant.
What does H99 error mean on my Panasonic CU-E24NKUA Air Conditioner?
The H99 error in your Panasonic Air Conditioner indicates indoor freeze prevention protection during cooling or soft dry modes. This can be due to a clogged air filter, dust accumulation on the indoor unit heat exchanger, an air short circuit, a faulty indoor pipe temperature sensor, or a faulty indoor unit PCB.
What does F95 error mean on a Panasonic CU-E24NKUA Air Conditioner?
The F95 error in your Panasonic Air Conditioner indicates a cooling high pressure abnormality. This could be due to a rise in outdoor pipe temperature caused by a short circuit of hot discharge air flow, a defective outdoor fan motor, a defective outdoor pipe temperature sensor, or a defective outdoor unit PCB.
What does H98 error mean on my Panasonic Air Conditioner?
The H98 error in your Panasonic Air Conditioner indicates indoor high pressure protection. This can be caused by a clogged air filter, dust accumulation on the indoor unit heat exchanger, an air short circuit, a faulty indoor pipe temperature sensor, or a faulty indoor unit PCB.
What does H16 error mean on my Panasonic CU-E24NKUA?
The H16 error in your Panasonic Air Conditioner indicates an open circuit in the outdoor current transformer. This could be due to a defective CT, a defective outdoor PCB, or a defective compressor (low compression).
What does F93 error mean on my Panasonic CU-E24NKUA Air Conditioner?
The F93 error in your Panasonic Air Conditioner indicates a compressor rotation failure. This can be caused by a compressor terminal disconnect or an outdoor PCB malfunction.
What does error code F11 mean on my Panasonic CU-E24NKUA?
The F11 error in your Panasonic Air Conditioner indicates an abnormality with the indoor pipe temperature sensor. This could be due to a faulty connector connection, a faulty indoor pipe temperature sensor, or a faulty indoor main PCB.
What does F96 (IPM Overheating) mean on my Panasonic CU-E24NKUA?
The error F96 in your Panasonic Air Conditioner indicates IPM overheating, which can be caused by a short circuit of hot discharge air flow, a defective outdoor fan motor, a defect in the internal circuitry of the IPM, or a defective IPM temperature sensor.
General| Cooling Capacity | 24000 BTU/h |
|---|---|
| Compressor Type | Inverter |
| Refrigerant | R32 |
| Type | Split System |
| Seasonal Energy Efficiency Ratio (SEER) | 16.0 |
| Power Supply | 220-240V/50Hz |
| Weight (Indoor Unit) | 9 kg |
Explains warning symbols and general safety precautions to prevent injury.
Specifies the recommended operating temperature ranges for cooling and heating.
Details power supply requirements and recommended circuit breakers.
Safety precautions related to children and batteries for the remote control.
Detailed safety measures for power cords and electrical shock prevention.
How to turn on/off, set temperature, and select operation modes.
Guides on adjusting fan speed and controlling airflow direction.
How to activate quiet mode to reduce operational noise.
Operations for quick temperature adjustment and indicator brightness.
Instructions for setting and cancelling ON/OFF timers.
Steps for cleaning the indoor unit and its parts.
Guidelines for cleaning and replacing air filters.
Lists common occurrences that are not actual malfunctions.
Essential checks to perform before contacting a dealer.
Procedure to retrieve and interpret error codes.
Guidelines for non-use and conditions requiring professional service.
Information on disposal and regulatory compliance statements.
Step-by-step instructions for setting up the remote control.
Quick guide to selecting mode, starting/stopping, and setting temperature.
