To Next PageTo Next PageWhy does my Panasonic CU-PC24QKH remote control not work?
If your Panasonic Air Conditioner's remote control isn't working, ensure the batteries are correctly inserted and replace them if they are weak.
How to improve the cooling efficiency of my Panasonic CU-PC24QKH Air Conditioner?
If your Panasonic Air Conditioner is not cooling efficiently, make sure you set the temperature correctly, close all doors and windows, clean or replace the filters, and clear any obstructions at the air inlet and outlet vents.
What to do if my Panasonic CU-PC24QKH Air Conditioner does not receive the signal from the remote control?
If your Panasonic Air Conditioner isn't receiving the signal from the remote control, ensure that the receiver is not obstructed. Certain fluorescent lights may interfere with the signal transmitter; please consult an authorised dealer.
Why is the electric current too high in my Panasonic CU-PC24QKH?
The electric current might be too high in your Panasonic Air Conditioner because of a dusty condenser, preventing heat radiation during operation. Measuring electric current during operation can help diagnose this issue.
Why is there high pressure on the gas side of my Panasonic CU-PC24QKH?
High pressure on the gas side of your Panasonic Air Conditioner may be caused by an inefficient compressor. Measuring gas side pressure can help to determine if this is the case.
How to check insufficient compressing of a compressor in Panasonic CU-PC24QKH?
To check for insufficient compressing of a compressor in your Panasonic Air Conditioner, look for these signs: the electric current during operation becomes approximately 20% lower than the normal value, the discharge tube of the compressor becomes abnormally hot (normally 70°C to 90°C), and the difference between high pressure and low pressure becomes almost zero.
General| Brand | Panasonic |
|---|---|
| Model | CU-PC24QKH |
| Category | Air Conditioner |
| Language | English |
Instructions for inserting batteries into the remote control.
Steps to set the clock on the remote control.
Guide to selecting modes, starting/stopping, and setting temperature.
Illustration and labeling of remote control buttons and indicators.
Lists accessories provided with the air conditioner unit.
Important warnings for safe operation of the indoor and outdoor units.
Safety advice specific to the remote control and its batteries.
Guidelines to prevent electric shock and fire related to power supply.
Precautions for usage, environmental factors, and handling the unit.
Warning against using rechargeable batteries for the remote control.
Explains the iAUTO mode for reaching temperature quickly.
Details on COOL, DRY, and AUTO modes for different environments.
How to adjust horizontal and vertical airflow direction.
Using the manual button on the unit when the remote is unavailable.
How to adjust the fan speed for optimal airflow.
Instructions for setting the ON/OFF timer for scheduled operation.
Recommended temperature ranges for COOL mode operation.
Steps for cleaning the indoor unit's front panel and main body.
Routine cleaning and replacement of air filters.
Procedures for preparing the unit for long periods of non-operation.
Common symptoms that do not indicate a malfunction.
Checks to perform before calling for professional servicing.
Situations requiring immediate professional service.
Guidelines for disposal of old equipment and batteries.
