To Next PageTo Next PageWhy is my Panasonic CU-S24KKQ making a water flowing sound during operation?
The water flowing sound you hear during the operation of your Panasonic Air Conditioner is due to the refrigerant flow inside the unit.
What to do if my Panasonic CU-S24KKQ stops and the timer indicator blinks?
Use the remote control to retrieve the error code.
What to do if Patrol sensor or e-ion indicator on the indoor unit of my Panasonic CU-S24KKQ Air Conditioner is blinking?
Stop Patrol or e-ion operation then restart it. If the patrol sensor or e-ion indicator still blinking, please consult authorized dealer.
Why is there inconsistent air flow during PATROL operation in my Panasonic Air Conditioner?
The inconsistent airflow during PATROL operation in your Panasonic Air Conditioner is because the fan speed is adjusted automatically during patrol operation.
Why is my Panasonic Air Conditioner making a cracking sound during operation?
The cracking sound you hear during the operation of your Panasonic Air Conditioner is caused by changes in temperature, leading to the expansion and contraction of the unit.
Why does the power indicator blink on my Panasonic Air Conditioner before it is switched on?
The blinking power indicator on your Panasonic Air Conditioner before it's switched on is a preliminary step in preparation for operation when the ON timer has been set.
Why is there an operation delay after I restart my Panasonic Air Conditioner?
The delay you experience after restarting your Panasonic Air Conditioner is a protection mechanism for the unit’s compressor.
Why does my Panasonic CU-S24KKQ Air Conditioner indoor fan stop occasionally during automatic fan speed setting?
The indoor fan in your Panasonic Air Conditioner stops occasionally during automatic fan speed setting to remove surrounding odours. Select QUIET operation to maintain consistent air flow.
Why does my Panasonic CU-S24KKQ have a peculiar odour?
A peculiar odour from your Panasonic Air Conditioner may be due to a damp smell emitted by the wall, carpet, furniture, or clothing.
What to do if my Panasonic Air Conditioner cooling is not working efficiently?
If your Panasonic Air Conditioner isn't cooling efficiently, make sure you have set the temperature correctly. Also, close all doors and windows, clean or replace the filters, and clear any obstructions at the air inlet and outlet vents.
Explains warning signs and symbols for prohibited/compulsory actions.
Safety rules for indoor/outdoor units and the remote control.
Specifies optimal temperature ranges for cooling operation.
Safety regarding cords, outlets, earthing, and emergency power off.
Cautions on unit handling, environment, and operational safety.
Advice on battery types and removal for storage.
Instructions on how to turn the air conditioner on or off using the remote.
Guidance on selecting the desired temperature within the operating range.
Explanation of different operation modes like AUTO, COOL, and DRY.
Instructions for adjusting the fan speed, including automatic adjustment.
How to adjust vertical and horizontal airflow direction.
Using the ECO PATROL function for energy saving based on presence.
Operating PATROL and e-ion for air quality and purification.
Improving humidity levels and adjusting airflow for comfort.
Activating quiet mode to reduce airflow noise.
Operation to quickly reach the desired temperature.
Instructions for setting ON and OFF timers for the unit.
Overview of the indoor unit's components like front panel and receiver.
Guidelines for cleaning the indoor unit and its filters.
Maintenance for e-ion system, filters, and charging wire.
Symptoms that do not indicate a malfunction.
Steps to check before calling for professional servicing.
Important notes regarding the ECO PATROL sensor's detection capabilities.
Procedure to retrieve error codes for troubleshooting.
Instructions for inserting batteries into the remote control.
Steps to set the clock on the remote control.
Selecting mode, ON/OFF, and temperature.
Explains warning signs and symbols for prohibited/compulsory actions.
Safety rules for indoor/outdoor units and the remote control.
Specifies optimal temperature ranges for cooling operation.
Safety regarding cords, outlets, earthing, and emergency power off.
Cautions on unit handling, environment, and operational safety.
Advice on battery types and removal for storage.
Instructions on how to turn the air conditioner on or off using the remote.
Guidance on selecting the desired temperature within the operating range.
Explanation of different operation modes like AUTO, COOL, and DRY.
Instructions for adjusting the fan speed, including automatic adjustment.
How to adjust vertical and horizontal airflow direction.
Using the ECO PATROL function for energy saving based on presence.
Operating PATROL and e-ion for air quality and purification.
Improving humidity levels and adjusting airflow for comfort.
Activating quiet mode to reduce airflow noise.
Operation to quickly reach the desired temperature.
Instructions for setting ON and OFF timers for the unit.
Overview of the indoor unit's components like front panel and receiver.
Guidelines for cleaning the indoor unit and its filters.
Maintenance for e-ion system, filters, and charging wire.
Symptoms that do not indicate a malfunction.
Steps to check before calling for professional servicing.
Important notes regarding the ECO PATROL sensor's detection capabilities.
Procedure to retrieve error codes for troubleshooting.
Instructions for inserting batteries into the remote control.
Steps to set the clock on the remote control.
Selecting mode, ON/OFF, and temperature.
General| Brand | Panasonic |
|---|---|
| Model | CU-S24KKQ |
| Category | Air Conditioner |
| Language | English |
