Why is my Panasonic Air Conditioner remote control not working?
If the remote control for your Panasonic Air Conditioner is not working, ensure the batteries are inserted correctly and replace weak batteries.
What to do if my Panasonic Air Conditioner doesn't receive the remote control signal?
If the Panasonic Air Conditioner unit does not receive the signal from the remote control, ensure that the receiver is not obstructed. Note that certain fluorescent lights may interfere with the signal transmitter; consult an authorised dealer.
How to improve the efficiency of HEAT/COOL mode on my Panasonic CU-TZ35ZKE?
If your Panasonic Air Conditioner isn't operating efficiently in HEAT/COOL mode, make sure you've set the temperature correctly. Close all doors and windows, clean or replace the filters, and clear any obstructions at the air inlet and outlet vents.
Instructions for installing batteries in the remote control.
Steps to set the current time on the remote control.
Explanation of warning signs, caution symbols, and usage guidelines.
Safety advice for indoor/outdoor units, remote control, and child usage.
Guidelines for safe power supply connections and preventing electrical hazards.
Specific safety measures for R32 refrigerant, including flammability risks.
Precautions for service personnel, work procedures, and leak detection.
Steps for removing, evacuating, and charging refrigerant safely.
Procedures for safely decommissioning, labelling, and recovering refrigerants.
Steps to access and interpret diagnostic error codes from the unit.
General| Type | Split System |
|---|---|
| Cooling Capacity | 3.5 kW |
| Heating Capacity | 4.0 kW |
| Power Supply | 220-240 V, 50 Hz |
| Refrigerant | R32 |
| Outdoor Unit Dimensions (W x H x D) | 780 x 542 x 289 mm |
| Energy Efficiency Class (Cooling) | A++ |
| Energy Efficiency Class (Heating) | A+ |
| Noise Level (Indoor Unit) | 21 dB(A) |
| Noise Level (Outdoor Unit) | 49 dB(A) |
To Next Page
