Why does my Panasonic Air Conditioner's POWER indicator blink during HEAT mode with no warm air supply?
If the POWER indicator on your Panasonic Air Conditioner blinks during HEAT mode and no warm air is supplied (with the flap closed), it means the unit is in defrost mode and AIR SWING is set to AUTO.
What to do if my Panasonic CU-TZ20TKE Air Conditioner's HEAT/COOL mode isn't working efficiently?
If your Panasonic Air Conditioner isn't heating or cooling efficiently, make sure that you set the temperature correctly, close all doors and windows, clean or replace the filters, and clear any obstructions at the air inlet and outlet vents. Also, check if the circuit breaker has tripped or if any timers have been set.
Why does my Panasonic CU-TZ20TKE's outdoor unit emit water or steam?
The water or steam emitted from the outdoor unit of your Panasonic Air Conditioner is due to condensation or evaporation occurring on the pipes.
Why is there discoloration of some plastic parts on my Panasonic Air Conditioner?
Discoloration of some plastic parts on your Panasonic Air Conditioner is subject to the material types used and is accelerated when exposed to heat, sunlight, UV light, or environmental factors.
Why does my Panasonic CU-TZ20TKE Air Conditioner make a cracking sound during operation?
The cracking sound you hear during the operation of your Panasonic Air Conditioner is caused by changes in temperature, leading to the expansion and contraction of the unit's components.
Why does my Panasonic Air Conditioner's indoor fan stop occasionally during automatic fan speed setting?
The indoor fan in your Panasonic Air Conditioner stops occasionally during automatic fan speed setting to help remove the surrounding odour.
Why is there a delay after restarting my Panasonic CU-TZ20TKE Air Conditioner?
Operation is delayed a few minutes after restarting as a protection mechanism for the unit’s compressor.
Why POWER indicator blinks in HEAT mode of Panasonic Air Conditioner?
The POWER indicator blinks during HEAT mode with no warm air supply (and flap is closed) because the unit is in defrost mode (and AIR SWING is set to AUTO).
Why does my Panasonic CU-TZ20TKE Air Conditioner have a peculiar odour?
The peculiar odor from your Panasonic Air Conditioner may be due to a damp smell emitted by the wall, carpet, furniture, or clothing.
Why is the cooling/heating capacity reduced on my Panasonic CU-TZ20TKE at the lowest fan speed?
If you've noticed a reduction in cooling/heating capacity during the lowest fan speed setting on your Panasonic Air Conditioner, it's because the low fan speed prioritizes low noise operation, which can reduce cooling/heating capacity. To increase capacity, increase the fan speed.
Explains how to select operation modes, start/stop the unit, and set the temperature.
Covers general warnings and cautions for unit operation, installation, and user safety.
Specific precautions for appliances filled with R32 refrigerant and handling safety.
Detailed precautions for R32/R410A, installation, operation, and avoiding damage.
Lists common symptoms that do not indicate malfunction and their potential causes.
General| Type | Split System |
|---|---|
| Cooling Capacity | 2.0 kW |
| Heating Capacity | 2.5 kW |
| Power Supply | 220-240 V, 50 Hz |
| Refrigerant | R32 |
| Indoor Unit Weight | 9 kg |
| Air Flow (Indoor) | 9.4 m³/min |
| Operating Temperature (Cooling) | -10 to 46°C |
| Operating Temperature (Heating) | -15 to 24°C |
To Next Page
