Panasonic CZ-TAW1 - Troubleshooting; Wireless Connection Issues; Ethernet Connection Issues; Advanced Setting

7
English

1
2
3
4 5 6
7 8 9
No. Item Description
1 Power LED Indicates that the adaptor is being supplied
with power.
2 Status LED Indicates the status of the adaptor.




3 Link LED Indicates the communication status of the
adaptor.
4 WPS switch Switches WPS ON.
5 Register/Reset switch Enables user registration and resetting.
6 Check switch
Check the communication status of the adaptor.
Switches between Ethernet and Wireless
modes each time it is pressed and held for
10 seconds.
7 LAN port Used to connect the LAN cable for wired
connection.
8 Hole (CN‑CNT cable) Pass the CN‑CNT cable through here.
9 USB port (type A) Used when making settings using a USB
memory device.