Firmware Ver. 3.0 – Compatible with Frame.io Camera to Cloud
F-52
Notes About the Upload Queue (Transfer Reservation
List)
When the camera has been connected to Frame.io, the images in the
upload queue are uploaded to Frame.io.
•
If there are images remaining in the upload queue, uploading is continued even if the
camera on/off switch is set to [OFF]. The power is turned off when uploading is
completed. If [Exit] is selected to turn off the power, uploading is resumed when the
camera is next turned on.
•
Uploading is canceled when the connection with Frame.io is broken and then is
resumed when the connection is reestablished.
•
The upload queue is cleared in the following cases:
– [Clear Upload Queue] is executed
– Pairing with Frame.io is canceled
•
Do not remove the battery while the camera is still turned on. The upload queue will
not be kept properly.
To Next Page
Loading...
