Firmware Ver. 3.0 – SH Pre-burst Recording Function Has Been Added
F-57
Notes on SH pre-burst recording
•
There are limits on the shutter speed you can set.
– [SH PRE]: To a minimum of 1/30
•
Pictures taken before the shutter button is pressed fully are not saved in the
following cases:
– When recording with the Touch Shutter
– When [Half-Press Shutter] in the [Custom] ([Focus/Shutter]) menu is set to
[ON]
•
When the ambient temperature is high or Pre-Burst recording is performed
continuously, even if you press the shutter button halfway, Pre-Burst may not
operate to protect the camera from overheating. Wait until the camera cools
down.
•
Even if you press the shutter button halfway, Pre-Burst may not operate when
there is insufficient free space on the card.
•
The refresh rate on the live view screen becomes 30 fps when you have selected
[SH PRE] and you press the shutter button halfway.
To Next Page
Loading...
