Panasonic DH-4UDP1 - Page 8

EN8
g) U-Mode temperature and timer setting.
Steps To Do LCD Display Remarks
Entering U-Mode
setting.
Long Press the
Set button until
"-2" appear at
temperature
Display.
WarmCoolHot &
Up Down Cool
Cool
Safe
U-Memory
Now in "Cool
Down" U Mode
Other U-Mode
Press U-Mode button.
Warm Up 1 time.
Hot & Cool 2 times.
Temperature
Setting.
Press - or + button
to set temperature.
Press Set button to
confi rm.
WarmCoolHot &
Up Down Cool
Cool
Safe
U-Memory
Timer indication
"20" will fl ash.
U-Mode Timer
Cool Down 20
Warm Up 20
Hot & Cool
H: 40; C:30
(Alternately)
Timer Setting.
Press - or + button
to set timer.
WarmCoolHot &
Up Down Cool
Cool
Safe
U-Memory
The timer indication will continue to fl ash during
selection.
Press Set button to
confi rm.
The display will become as default after confi rm the
timer setting.
Enter U-Mode
function.
Press U-Mode
button follow to
desired U-Mode.
WarmCoolHot &
Up Down Cool
Cool
Safe
U-Memory
The selected U-Mode with the New Temperature and
Timer Setting appear.
10.
U-Memory setting.
DH-4UDP1 & DH-4UD1
a) U-Memory function can be selected by pressing U-Memory button.
b) U-Memory enables users to record, recall and erase data up to three memories.
Steps To Do LCD Display Remarks
U-Memory Data
Record.
Press and hold the U-Memory
[1 / 2 / 3] button until U-Memory
number fl ash.
WarmCoolHot &
Up Down Cool
Cool
Safe
Pump
O
U-Memory
1
When U-Memory number
illuminates, data will be recorded.
U-Memory Data
Recall.
Press one of U-Memory button
[1 / 2 / 3].
WarmCoolHot &
Up Down Cool
Cool
Safe
Pump
O
U-Memory 1
U-Memory number will fl ash.
U-Memory Data
Erase.
Press and hold the U-Memory
[1 / 2 / 3] button until U-Memory
number disappear.
WarmCoolHot &
Up Down Cool
Cool
Safe
Pump
O
U-Memory
U-Memory number disappear.
(The Indication on LCD Display
will blinking before the U-Memory
number disappear, data will be
erased).
11.
Time Setting.
DH-4UDP1 & DH-4UD1
i. Press Set button.
Time indication will fl ash.
ii. Press + or - button to set the time.
iii. Press Set button to confi rm new time setting. The new time indication will illuminate.
12. Pump Setting.
WarmCoolHot &
Up Down Cool
Cool
Safe
Pump
O
Max
U-Memory
DH-4UDP1
i. In default / normal condition, pump function is On condition.
ii. Press the Pump button to off the pump function.
Pump Off Indicator will illuminate on the display.
iii. To turn On the pump function, press the Pump button.
Pump Indicator will illuminate on the display.