To Next PageTo Next PageWhat to do if no hot water comes out of my Panasonic Bathroom Fixtures?
If no hot water is coming out of your Panasonic Bathroom Fixture, ensure the Push On-Off button is in the 'On' position. Also, check that the ELB Reset Lever is not slid down; push it up to reset. Confirm that the ON/OFF DP (double pole) Switch and the Miniature Circuit Breaker (MCB) are switched on.
Why is water not drawn normally in my Panasonic DH-4US1 Bathroom Fixtures?
If water isn't flowing normally in your Panasonic Bathroom Fixture, examine the Filter Unit and clean it if it's clogged with dirt. Also, inspect the Shower Head and Shower Plate, cleaning them if they are blocked by dirt.
Why no hot water from my Panasonic DH-4US1?
If no hot water is coming from your Panasonic Bathroom Fixtures unit, first, ensure the Push On-Off button is in the 'On' position. Next, check that the ELB Reset Lever hasn't slid down; push it up to reset the ELB. Also, verify that the ON/OFF DP (double pole) Switch and the Miniature Circuit Breaker (MCB) are both switched on.
What to do if no hot water comes out from Panasonic DH-4US1 Bathroom Fixtures?
If no hot water is coming out, ensure the Push On-Off button is in the “On” position. Also, check that the ELB Reset Lever is not slid down; push it up to reset the ELB. Confirm that the ON/OFF DP (double pole) switch and the Miniature Circuit Breaker (MCB) are switched On.
What to do if no water flows out from the shower head of Panasonic DH-4US1?
If no water flows from the Shower Head of your Panasonic Bathroom Fixture, check if the Main Water Valve is closed and turn it 'On'. If the LCD Panel is off, do not use the unit and contact an authorized dealer immediately.
How to fix E3 flashing error on Panasonic Bathroom Fixtures?
If the display on your DH-4UD1 or DH-3UD1 Panasonic Bathroom Fixture is flashing 'E3', reset the unit by turning it off and then on again using the Push On-Off Button.
What to do if water is not drawn normally in Panasonic Bathroom Fixtures?
If water is not being drawn normally in your Panasonic Bathroom Fixtures, start by checking the Filter Unit and cleaning it if it's clogged with dirt. Then, inspect the Shower Head and Shower Plate, cleaning them if they are also clogged. For DH-3UDP1 and DH-3UP1 models only, try turning the unit off and then on again using the Push On-Off Button to reactivate the water pump.
What to do if no water flows from Panasonic Bathroom Fixtures shower head?
If no water flows from the Shower Head of your Panasonic Bathroom Fixtures, check that the Main Water Valve is turned 'On'. If the LCD Panel is still 'OFF' when you press the Push On-Off Button, stop using the unit and contact an authorized dealer immediately.
How to fix E3 error on Panasonic Bathroom Fixtures?
To address the 'E3' flashing error on your Panasonic DH-3UDP1 or DH-3UD1 Bathroom Fixtures, reset the unit by turning it off and then on again using the Push On-Off Button.
How to fix E3 flashing on Panasonic DH-4US1 Bathroom Fixtures?
To resolve an E3 fault display, reset the device by turning it off and then on again using the Push On-Off Button.
General| Brand | Panasonic |
|---|---|
| Model | DH-4US1 |
| Category | Bathroom Fixtures |
| Language | English |
Safety instructions to prevent personal injury, injury to others, and property damage.
Step-by-step guide on operating the electric home shower.
Lists common problems and their solutions for the appliance.
Steps for installing the unit, including location, front plate, and electrical wiring.
Instructions for water piping connections and essential grounding procedures.
