EN8
g) U-Mode temperature and timer setting.
Steps To Do LCD Display Remarks
Entering U-Mode
setting.
Long Press the
Set button until
"-2" appear at
temperature
Display.
WarmCoolHot &
Up Down
Cool
Cool
Safe
U-Memory
Now in "Cool
Down" U Mode
Other U-Mode Press U-Mode button.
Warm Up 1 time.
Hot & Cool 2 times.
Temperature
Setting.
Press - or + button
to set temperature.
Press Set button to
confi rm.
WarmCoolHot &
Up Down
Cool
Cool
Safe
U-Memory
Timer indication
"20" will fl ash.
U-Mode Timer
Cool Down 20
Warm Up 20
Hot & Cool
H: 40; C:30
(Alternately)
Timer Setting.
Press - or + button
to set timer.
WarmCoolHot &
Up Down
Cool
Cool
Safe
U-Memory
The timer indication will continue to fl ash during
selection.
Press Set button to
confi rm.
The display will become as default after confi rm the
timer setting.
Enter U-Mode
function.
Press U-Mode
button follow to
desired U-Mode.
WarmCoolHot &
Up Down
Cool
Cool
Safe
U-Memory
The selected U-Mode with the New Temperature and
Timer Setting appear.
10.
U-Memory setting.
DH-4UD1 & DH-3UD1
a) U-Memory function can be selected by pressing U-Memory button.
b) U-Memory enables users to record, recall and erase data up to three memories.
Steps To Do LCD Display Remarks
U-Memory
Data Record.
Press and hold the U-Memory
[1 / 2 / 3] button until U-Memory
number fl ash.
WarmCoolHot &
Up Down
Cool
Cool
Safe
O
U-Memory
1
When U-Memory number
illuminates, data will be recorded.
U-Memory
Data Recall.
Press one of U-Memory button
[1 / 2 / 3].
WarmCoolHot &
Up Down
Cool
Cool
Safe
U-Memory
1
U-Memory number will fl ash.
U-Memory
Data Erase.
Press and hold the U-Memory
[1 / 2 / 3] button until U-Memory
number disappear.
WarmCoolHot &
Up Down
Cool
Cool
Safe
O
U-Memory
U-Memory number disappear.
(The Indication on LCD Display
will blinking before the U-Memory
number disappear, data will be
erased).
11. Time Setting.
DH-4UD1 & DH-3UD1
i. Press Set button.
Time indication will fl ash.
ii. Press + or - button to set the time.
iii. Press Set button to confi rm new time setting. The new time indication will illuminate.
To Next Page
Loading...
