25
RQT9308
Advanced
operations
≥Even when the unit is turned off, you can display the timer
recording list by pressing [PROG/CHECK].
Press [PROG/CHECK].
A Icons
B Message displayed in the “Drive space” line
C Channel name, programme name and other
information are displayed.
∫ To change a programme
Press [3, 4] to select the programme and press [OK]. (> 24,
Manually programming timer recordings, step 3)
∫ To delete a programme
Press [3, 4] to select the programme and press [DELETE ¢].
You can also delete a programme with the following steps
1 Press [3, 4] to select the programme and press [OPTION].
2 Press [3, 4] to select “Delete” and press [OK].
∫ To exit the timer recording list
Press [PROG/CHECK].
≥Programmes that failed to record are deleted from the timer
recording list at 4 a.m. two days later.
In timer recording of digital broadcast with multi-audio or multi-
subtitle, audio and subtitle language to be recorded will follow the
setting of “DVB Preferred Language” in the Setup menu (> 50).
When the recording drive is “DVD” and there is not enough
remaining space, recording automatically switches to the “HDD”. If
there is no disc in the tray or the disc cannot be recorded on or when
timer recording starts while copying, the recording drive will be
altered to the HDD.
≥The DIRECT NAVIGATOR shows which programmes were relief-
recorded (“ ” is displayed.) (> 27).
≥If the time remaining on the HDD is insufficient, as much of the
programme as possible will be recorded onto the HDD.
[HDD]
If you record a programme onto HDD repeatedly everyday or every
week using timer recording, the unit will record the new programme
over the old one.
This function can be used only when weekly recording or daily
recording is selected.
1 Press [PROG/CHECK].
2 Press [3, 4] to select the programme
and press [OK].
3 Press [2, 1] to select “RENEW”
column.
4 Press [3, 4] to select “ON” and press
[OK].
≥If a programme set for Auto Renewal Recording is protected or
while play back is taking place from the HDD, or while copying, the
programme will not be overwritten. Instead the programme set for
recording will be saved as a separate programme, and this
programme will be the one to be overwritten when the next Auto
Renewal Recording takes place.
≥Playlists made from programmes that were set for Auto Renewal
Recording are deleted along with auto renewal.
≥When there is not enough space on the HDD, the programme may
not be recorded completely.
Check, change or delete a programme
F Timer recording standby is activated.
[ This programme is currently recording.
Programmes are overlapped. Recording of the programme
with the later start time starts when the earlier programme
finishes recording.
You stopped a daily or weekly timer recording. The icon
disappears the next time the timer programme starts
recording.
The disc was full so the programme failed to record.
The programme was copy-protected so it was not recorded.
X The programme did not complete recording because the disc
is dirty or some other reason.
Timer programmes set to Auto Renewal Recording (> right).
Titles that have been rerouted to the HDD
(Displayed while recording.)
HDD Recording drive is set to HDD
DVD Recording drive is set to DVD
OK: Displayed if the recording can fit in the remaining
space.
> (Date): For recordings made daily or weekly, the display will
show until when recordings can be made (up to a
maximum of one month from the present time) based
on the time remaining on the disc.
! : It may not be possible to record because:
≥there is not enough space left.
≥the number of possible titles has reached its
maximum.
≥programmes are overlapped.
≥you stopped a daily or weekly timer recording.
Relief: Timer programmes that will be relief recorded to the
HDD.
Timer
Recording
1:58 SP
DVD
30:24 SP
HDD Remain
RETURN
OK
Press OK to store new programme.
Mode
STTL
Stop Start
No.
Date
HDD
DVD
Channel
Drive
space
New Timer Programme
TUE 14.10.09. 12:54:00
Note
Language for digital broadcast with
multi-audio or multi-subtitle
Relief Recording
Auto Renewal Recording
Timer
Recording
1:58 SP
DVD
30:24 SP
HDDRemain
Mode
StopStartChannel Date
HDD
DVD
22:3022:00SUN HDD
1 ARD
Programme Name
SP
RENEW
ON
STTL
OFF
All Channels : ARD
TUE 14.10.09. 12:53:00
Note
DMREX769EC&EF-RQT9308-L_eng.book 25 ページ ２００９年２月２３日 月曜日 午前９時２９分
To Next Page
Loading...
Need help?
General
