55
RQT9308
Setting menus
Setting for Standby
≥Press [OK] to show the following settings.
Power Save
[On] Power consumption is minimized when the unit is turned
to standby (> 68).
[Off] This sets to Quick Start Mode.
≥Refer to the chart for the Power Save function features (> 10)
when the unit is turned off.
Auto Standby
Set the time to automatically turn the unit off.
After the unit has finished operating, the unit will be turned off
once the set time has passed.
[2 hours] [4 hours
] [6 hours]
[Off] The unit will not automatically turn off.
DivX Registration
You need this registration code to purchase and play DivX Video-
on-Demand (VOD) content (> 29).
System Update
In order to update this unit’s software and to support system
changes made by broadcasts, this unit periodically performs
software updates.
Press [OK] to show the following settings.
≥Update data is sent by an unscheduled digital broadcast. In order
to receive these updates, you must be able to receive digital
broadcasts.
≥An update will take approximately 60 minutes. While the update
is in progress, “SW-DL” appears on the unit’s display. You cannot
operate the unit until the update is complete. Removing the AC
mains lead while the update is in progress may damage the unit.
Software Update in Standby
[On] When you set this unit to standby mode, software
updates are downloaded automatically.
[Off]
Software search period
Selects the time to automatically perform updates when the unit
is set to standby mode. This can only be set when “Software
Update in Standby” is set to “On”.
≥If there is a programmed recording set for the time you have
selected, the programmed recording will be given priority.
[Automatic
]
[02:00–06:00] [06:00–10:00] [10:00–14:00]
[14:00–18:00] [18:00–22:00] [22:00–02:00]
Software Update Search Now
Start the search for new software manually.
A new software version is announced by a message. Do not turn
your unit off during the update. This could result in the loss of
data. A message shows that the update has finished.
≥If applicable update data is found, press [2, 1] to select “Yes”
and press [OK].
Initialize
≥Press [OK] to show the following settings.
Shipping Condition
All the settings except for the ratings level, ratings password, and
clock settings return to the factory preset. The timer recording
programmes are also cancelled.
[Yes] [No
]
Default Settings
All the settings other than the tuning settings, clock settings,
country settings, language settings, disc language settings,
ratings level, ratings password, remote control code, return to the
factory presets.
[Yes] [No
]
DMREX769EC&EF-RQT9308-L_eng.book 55 ページ ２００９年２月２３日 月曜日 午前９時２９分
To Next Page
Loading...
