The date and time is calculated, including
leap year, up to DEC 31 2089.
MENU Button
SELECT SET
WHEEL
--EXAMPLE:
:1998
• _ Rotate
: 1999
: JAN
Before you begin,..
• connect the Palmcorderto a power source,
• Setthe POWERswitchto CAMERA.
1
2
3
4
Press MENU to display the Camera
Mode menu screen (see page 17),
Rotate the SELECT SET WHEEL to
select CLOCK-SET.
Press SELECT SET WHEEL down to
select CLOCK-SET ON. The DATE/
TIME SEI-IING menu appears.
Rotate the SELECT SET WHEEL to
select the desired numbers, then,
press SELECT SET WHEEL down to
fix that portion and move to the next.
Adjust the shaded items for the Year,
month, day, hour, and minute.
_NTH :199g
:JAN
DAY :29
HOUR :12AM
MINUTE :34
£P_rd;
When time setting is completed, press
the MENU Button to start the clock.
Note:
• If you should pass the current year,
continue pressing down on the SELECT
SET WHEEL until the year appears again.
• A built-in battery maintains clock
operation. If the Palmcorder is not
connected to a power source for a few
months, the built-in battery may discharge
and "CLOCK BAI-IERY" indication
appears (see page 23).
For assistance, call 1-800-211-PANA(7262) 15
To Next Page
Loading...
