J
If you have a problem with your Palmcorder, it may be something you can correct yourself.
Check the list below for symptoms and corrections.
Symptom
No picture in the EVF or LCD Monitor ...
Video cassette can't be inserted ...
Video cassette can't be removed ...
No operation starts when operation buttons
are pressed ._
Recording cannot be done ...
AutoFocus does not operate ...
Sound from microphone can't be monitored
Sound can't be heard ...
Correction
• Make sure the Power Source is connected.
(pp. 11, 12)
• Make surethe POWER switchis set to ON.
(pp. 27, 32)
• Checkthe Dew Indicator.(p. 23)
• Make sure thebatteryisfully charged.(p. 10)
• Make sure all necessarycablesare connected
correctlyand firmly. (p. 12)
• Make sure theLens Cap is removed.(p. 27)
• Make sure the Power Source is connected.
(pp. 11, 12)
• Insert the cassette with the window side facing up.
(p. 13)
• Make surethe PowerSource is connected.
(pp. 11, 12)
, Check the Dew Indicator. (p. 23)
• Make surethe recordtab is closed.(p. 14)
• Check the BatteryIndicator.(p. 20)
• Checkthe Dew Indicator.(p. 23)
• Make surethe FOCUS is setto AUTO. (p.44)
• Make surethe unitis ON withCAMERA mode.
(p. 27)
• Make sure the unit is set to REC or Record/Pause
mode.
• Make sure the Audio on the VCR MENU is set to
ST1. (pp. 19, 48)
58 For assistance, call 1-800-211-PANA(7262)
To Next Page
Loading...
