[ TV with AUDIO/VIDEO IN Jacks ]
A/V OUT
-AN Cable
(Supplied)
Set POWER to CAMERA or VCR,
To view what the Palmcorder is
recording or to playback a tape on your
TV,
Turn your TV ON and set it to LINE
INPUT or S-VIDEO.
Check your TV operating instructions
for further information.
Start playback or begin a recording.
• Make sure the Paimcorder and TV are
turned off while connecting.
• Please connect the AN cable securely.
To Audio In To Video In
[ TV with S-VIDEO IN Jacks ]
For best Chrominance and Luminance, use
the S-Video connection if available on your
TV.
OUT
i[,_]
(Not supplied)
To Audio In
AN Cabte
(Supplied)
To S-Video In
Optional Remote Control Only
(See page 49)
You can display the various EVF and LCD
indications on your TV by pressing
DISPLAY ON TV on remote control, Press
again to remove the indications.
DISPLAY -- _.__.'_]
ON TV
oottoo
CATV System Installer
Thisreminder is providedto callthe CATV
systeminstaller'sattentiontoArticle820-40 of
theNECin USA(andtothe Canadian
ElectricalcodeinCanada) that provides
guidelinesfor proper groundingand,in
particular, specifiesthat thecable ground shall
beconnected tothe grounding system of the
building,as closeto the poinl ofcable entry as
practical
31
To Next Page
Loading...
