This feature helps compensate for any
unitentional hand or body movement. It can
be used in both the Recording and
Playback (VCR) modes.
INORMALJ
[EISON]
1,APOWERSwitch
3RI_C/PAUSE Button
2, 4, C, D BPLAYButton
EIS Button
[ CAMERA mode I
Set POWER to CAMERA.
• The POWER lamp lights red.
• Be sure POWER is fully turned to
CAMERA position.
2
3
4
Press EIS to stabilize the picture.
• Picture flicker may be observed
when taping under fluorescent
lighting condilions.
• The EIS indicator flashes when the
light lever is inadequate.
• Turn D.E.I.S. OFF during recording
when using a tripod.
Press REC/PAUSE to start recording.
Press EIS again to cancel.
• Be sure that D.E.t.S. is turned off
when not needed.
D.E.I.S. may' not function when...
• Palmcorder movement is too
extreme.
• Recording a subject with distinct
horizontal or vertical stripes.
• Recording in low light situations.
• Recording a subject under a great
amount of fluorescent light.
• Recording a scene with very fast
motions.
! VCR mode ]
A set POWER to VCR.
• The POWER lamp lights red.
• Be sure POWER is fully turned to
VCR position.
• Other Digital Functions are turned off
automatically when the EIS and Digital
Zoom are selected.
ess PLAY to start playback.
C Press EIS to stabilize the picture.
D Press EIS again to cancel
• Be sure that D.E.I.S. is turned off
when not needed.
° When using D.E.I.S in VCR mode, the
image size is slightly larger.
32
To Next Page
Loading...
