Panasonic DMC-F2K - Mode and Menu Operation

12
VQT2T58 (ENG)
Changing the clock setting
1
Press [MENU/SET] in Normal Picture Mode.
2
Press
e
/
r
to select [CLOCK SET].
3
Press
q
and perform steps
3
and
4
for setting.
4
Press [MENU/SET] to close the menu.
• You can also set the clock in the [SETUP] menu.
• The clock setting is maintained for 3 months using the built-in clock battery even without
the battery. (Leave the charged battery in the unit for 24 hours to charge the built-in
battery.)
About the Mode and Menu Operation
Mode switching
MODE
1
Slide the recording/playback switch
A
to
1
(right) or
5
(left).
1
: Recording Mode
5
: Playback Mode
MODE
2
Press [MODE] to display the mode
selection screen.
(Example: Normal Picture Mode)
3
Press
e
/
r
to select a mode and press
[MENU/SET] to close the menu.
VQT2T58_DMC-F2_GN_EN.indd 12VQT2T58_DMC-F2_GN_EN.indd 12 2010/02/03 15:26:312010/02/03 15:26:31