Preparation/Basic
16
DVQX1043 (ENG)
• The clock is not set when the camera is shipped.
1 Turn the camera on.
• When the camera is turned on, the status indicator 1
lights up green.
2 Press [MENU/SET].
3 Press 2/1 to select the items (year, month, day,
hour, minute), and press 3/4 to set.
4 Press [MENU/SET] to set.
5 When [The clock setting has been completed.] is
displayed, press [MENU/SET].
6 When [Please set the home area] is displayed, press
[MENU/SET].
7 Press 2/1 to select the home area, and then press
[MENU/SET].
Format the card before recording a picture with this unit.
Since data cannot be recovered after formatting, make sure to back up necessary
data in advance.
Setting Date/Time (Clock Set)
Formatting the card (initialisation)
> [Setup] > [Format]
DMC-FZ2000MST-DVQX1043_eng.book 16 ページ ２０１６年９月１９日 月曜日 午前１１時１７分
To Next Page
Loading...
