Recording
34
DVQX1043 (ENG)
∫ About [More settings] (step 2 in P33)
¢ Not available for burst recording. When using burst recording, if you press and hold the
shutter button, recording will be performed continuously until a specified number of pictures
are taken.
Recording Mode:
∫ About [More settings] (step
2 in P33)
• When using burst recording, if you press and hold the shutter button, recording will be
performed until a specified number of pictures are taken.
∫ About [More settings] (step 2 in P33)
¢ Not available for burst recording. When using burst recording, if you press and hold the
shutter button, recording will be performed continuously until a specified number of pictures
are taken.
Exposure Bracket
[Step]
Sets the number of pictures to be taken and the exposure
compensation range.
[
3・1/3] (Takes three pictures with an interval of 1/3 EV) to
[7・1] (Takes seven pictures with an interval of 1 EV)
[Sequence] Sets the order in which pictures are taken.
[Single Shot Setting]
¢
[ ]: Takes one picture each time you press the shutter button.
[ ]: Takes all the pictures set to be taken when you press the
shutter button once.
Aperture Bracket
[Image Count]
[3], [5]: Takes a specified number of pictures with different
aperture values within the range based on the initial aperture
value.
[ALL]: Takes pictures using all aperture values.
Focus Bracket
[Step] Sets the interval between focus positions.
[Image Count]
¢
Sets the number of pictures to be taken.
[Sequence]
[0/s/r]: Alternately moves the focus position closer and farther
away within the range centred on the initial position as you take
pictures.
[0/r]: Moves the focus position farther away from the initial
position as you take pictures.
DMC-FZ2000MST-DVQX1043_eng.book 34 ページ ２０１６年９月１９日 月曜日 午前１１時１７分
To Next Page
Loading...
