Panasonic DMC-LS5 - Changing time settings

- 15 - VQT3W70
Setting the clock
To change time setting
●
Failure to set the date and time will cause the date/time to be improperly printed when
printing pictures at a digital photo center.
●
After the time has been set, the date can be printed correctly even if the date is not
displayed on the camera screen.
Select [Clock Set] from [Setup] or [Rec] menu, perform
and .
• If approximately 5 hours have elapsed after installing the batteries in the camera,
the clock settings will be retained for about 24 hours even if the batteries are
removed.
Downloaded From camera-usermanual.com Panasonic Manuals