Panasonic DMC-LX15EB - Default Chapter; Table of Contents

2
TABLE OF CONTENTS
PAGE PAGE
1 Safety Precautions -----------------------------------------------3
1.1. General Guidelines ----------------------------------------3
1.2. Leakage Current Cold Check ---------------------------3
1.3. Leakage Current Hot Check (See Figure. 1) --------3
1.4. How to Discharge the E.Capacitor on Wi-Fi/
Flash P.C.B. Unit -------------------------------------------4
2Warning--------------------------------------------------------------5
2.1. Prevention of Electrostatic Discharge (ESD)
to Electrostatically Sensitive (ES) Devices ----------5
2.2. How to Recycle the Lithium Ion Battery (U.S.
Only)-----------------------------------------------------------5
2.3. How to Replace the Lithium Battery-------------------6
3 Service Navigation------------------------------------------------7
3.1. Introduction --------------------------------------------------7
3.2. Important Notice -------------------------------------------7
3.3. Service Notes -----------------------------------------------8
3.4. General Description About Lead Free Solder
(PbF) -------------------------------------------------------- 10
3.5. How to Define the Model Suffix (NTSC or PAL
model)------------------------------------------------------- 11
4 Specifications ---------------------------------------------------- 16
5 Location of Controls and Components------------------ 18
6 Service Mode ----------------------------------------------------- 19
6.1. Error Code Memory Function ------------------------- 19
7 Troubleshooting Guide---------------------------------------- 22
7.1. Wi-Fi Module (Wi-Fi/Flash P.C.B. Unit) ------------- 22
8 Service Fixture & Tools --------------------------------------- 23
8.1. Service Fixture and Tools ------------------------------ 23
8.2. When Replacing the Main P.C.B. -------------------- 24
8.3. Service Position ------------------------------------------ 24
9 Disassembly and Assembly Instructions --------------- 25
9.1. Disassembly Flow Chart-------------------------------- 25
9.2. P.C.B. Location ------------------------------------------- 25
9.3. Disassembly Procedure -------------------------------- 26
9.4. Lens Disassembly Procedure------------------------- 36
9.5. Assembly Procedure for the Lens (Phase
Alignment)-------------------------------------------------- 39
9.6. The Application of Grease Method ------------------ 43
9.7. Removal of the MOS Unit ------------------------------ 44
10 Measurements and Adjustments -------------------------- 45
10.1. Introduction ------------------------------------------------ 45
10.2. Before Disassembling the unit ------------------------ 45
10.3. Details of Electrical Adjustment----------------------- 48
10.4. After Adjustment------------------------------------------ 55
11 Maintenance ------------------------------------------------------ 56
11.1. Cleaning Lens, LCD Panel ---------------------------- 56
12 Block Diagram --------------------------------------------------- 57
12.1. Overall Block Diagram ---------------------------------- 57
12.2. System Control Block Diagram ----------------------- 58
12.3. Video/Audio Process(1) Block Diagram ------------ 59
12.4. Video/Audio Process(2) Block Diagram ------------ 60
12.5. Lens Block Diagram ------------------------------------- 61
12.6. Flash/Gyro Block Diagram----------------------------- 62
12.7. Power (1) Block Diagram------------------------------- 63
12.8. Power (2) Block Diagram------------------------------- 64
12.9. Power (3) Block Diagram------------------------------- 65
13 Wiring Connection Diagram --------------------------------- 66
13.1. Interconnection Diagram ------------------------------- 66
14 Schematic Diagram -------------------------------------------- 67
15 Printed Circuit Board------------------------------------------ 67
16 Exploded View and Replacement Parts List----------- 67