Panasonic DMP-BD45 - Audio Information; About audio from audio output terminal; Recommended audio output setting

33
VQT2H94
Reference
Audio Information
The audio output differs depending on which terminals are connected to the amplifier/receiver, and the settings on the unit. (> 27,
Digital Audio Output)
≥ The number of channels listed is the maximum possible number of output channels.
HDMI AV OUT/DIGITAL AUDIO OUT
The settings of the audio output vary depending on the connected equipment. Refer to the table below and set each of items.
Press [FUNCTION MENU] > select “To Others” > “[OK]”> select “Setup” > “[OK]”> “Sound” >
Set each item
For details of the each item, refer to page 27.
About audio from audio output terminal
Terminal HDMI AV OUT DIGITAL AUDIO OUT
“Dolby D/Dolby D +/Dolby
TrueHD”/“DTS/DTS-HD”
“Bitstream”
*1
*1
When the connected equipment is not supported with these audio formats, the audio is output as Dolby Digital bitstream, DTS Digital Surround bitstream or
down-mixed 2ch PCM (e.g., TV).
“PCM”
*2*3
*2
When the connected equipment is not supported with multi channel surround, the audio is output as down-mixed 2ch PCM.
*3
[BD45] : Regardless of a condition, the maximum possible number is 5.1ch PCM.
“Bitstream” “PCM”
“BD-Video Secondary Audio” “On”
*4
*4
When playing BD-Video without secondary audio or button click sound, the audio is output as the same format as if “BD-Video Secondary Audio” was set to
“Off”.
“Off” “On”
*5
*5
When playing BD-Video with secondary audio or button click sound, the audio is output as 5.1ch.
“Off” “On”/“Off” “On”/“Off”
Dolby Digital/
Dolby Digital EX
*6
*6
With PCM output, Dolby Digital EX becomes PCM audio decoded as Dolby Digital, DTS-ES recorded to DVD-Video becomes PCM audio decoded as DTS
Digital Surround, and DTS-ES recorded to BD-Video becomes PCM audio decoded as DTS-ES.
Dolby Digital
Outputs using
original audio
DVD-Video : 5.1ch PCM Dolby Digital/
Dolby Digital
EX
*7
*7
When “BD-Video Secondary Audio” is set to “On”, Dolby Digital EX is output as Dolby Digital and DTS-ES is output as DTS Digital Surround, however if
playing BD-Video without secondary audio or button click sound, the audio is output as the original format.
Down-mixed
2ch PCM
BD-Video : 7.1ch PCM
*8
*8
[BD65] : When BD-Video is played and “7.1ch Audio Reformatting” is set to “Off”, the audio is output as 5.1ch.
Dolby Digital Plus/
Dolby TrueHD
7.1ch PCM Dolby Digital
DTS Digital Surround/
DTS-ES
*6
DTS Digital
Surround
DVD-Video : 5.1ch PCM DTS Digital
Surround/
DTS-ES
*7
BD-Video : 7.1ch PCM
*9
*9
The audio output is amplified from 5.1ch or 6.1ch to 7.1ch depending on the DTS, Inc. specifications.
DTS-HD High Resolution
Audio/
DTS-HD Master Audio
7.1ch PCM
*9
DTS Digital
Surround
7.1ch LPCM 7.1ch PCM Down-mixed 2ch PCM
Recommended audio output setting
Example of connected equipment
TV via HDMI
*1
Receiver with
HD
audio
*2
decoder
via HDMI
Receiver without
HD
audio
*2
decoder
via HDMI
Receiver via OPTICAL
Setup menu
“Digital
Audio
Output”
“Dolby D/Dolby D
+/Dolby TrueHD”
“PCM” “Bitstream
”“PCM” “PCM”
“DTS/DTS-HD” “PCM” “Bitstream”“PCM” “PCM”
“BD-Video
Secondary Audio”
“Off” “Off” “Off” “Off”
“PCM Down Conversion” No effect No effect No effect
“Off
”
*3
“Downmix” “Stereo” No effect No effect “Stereo”
*4
≥ Because underlined items are the factory presets, it is not necessary to change these settings.
*1
If connected to TV via except HDMI, these settings have no effect.
*2
HD audio: Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio and DTS-HD Master Audio
*3
If the connected equipment that does not support 96 kHz, set to “On”.
*4
If the connected equipment that supports the virtual surround function, set to “Surround encoded”.
VQT2H94~Body_mst.fm 33 ページ ２０１０年１月１９日 火曜日 午後２時５７分