11
Aging Perform sequence of modes as * Aging
Description shown below continually.
Display following the then mode. When the power is ON, press
[PAUSE], [PLAY] and [OPEN/
CLOSE] simultaneously for over 5
seconds and less than 10 seconds.
NOTE1:
If the unit has hung-up because of
pressing keys for over 10 seconds,
once turn off the power, and re-exe-
cute this command.
*When releasing Aging mode, press
[POWER] key over 4 seconds.
Demonstration lock/
unlock
Ejection of the disc is prohibited.
The lock setting is effective until unlocking the
tray and not released by Main unit
initialization of service mode.
*When lock the tray.
LOCK is displayed for 3 seconds.
When the power is on (SS mode),
press [PLAY] and [OPEN/CLOSE]
keys simultaneously for 5 seconds.
Note:
When a disc is not in tray, this
setting is not effective.
*When unlock the tray.
UNLOCK is displayed for 3 sec-
onds.
When the power is on (SS mode),
press [PLAY] and [OPEN/CLOSE]
keys simultaneously for 5 seconds.
*When press OPEN/CLOSE key
while the tray being locked.
Display LOCK for 3 seconds.
Press [OPEN/CLOSE] key while the
tray is being locked.
Progressive initialization The progressive setting is initialized to Inter-
lace.
The display before execution
leaves.
When the power is on (SS mode),
press [STOP] and [PLAY] simulta-
neously for 5 seconds.
Item FL display Key operation
Mode name Description Front Key
To Next Page
Loading...
