Panasonic DMP-BDT220 - Connecting to an Amplifier;Receiver

Connections & Settings
9
VQT3V20
STEP 2 : Connecting to an amplifier/receiver
Perform either one of the following connections in accordance with your amplifier/receiver input
terminal.
≥ Set “Digital Audio Output” (> 26).
≥ When connecting to a non-3D compatible amplifier/receiver, connect this unit to a TV via HDMI AV OUT,
then connect the TV and the amplifier/receiver. Please note, however, that the audio can only be up to
5.1ch.
≥ When using the TV or amplifier/receiver that does not have the indication of “(ARC)”
(non-ARC-compatible) on the HDMI terminal, in order to enjoy TV’s sound by amplifier/receiver it is
also required to connect the amplifier/receiver and TV using an optical digital cable.
≥ Set “HDMI Audio Output” to “Off” (> 26).
≥ Set “Digital Audio Output” (> 26).
HDMI AV OUT
HDMI IN
(ARC)
HDMI OUT
(ARC)
HDMI IN
Amplifier/receiver
HDMI cable
HDMI cable
OPTICAL
OPTICAL IN
Amplifier/receiver
Optical digital cable
DMP-BDT220_VQT3V20_eng.book 9 ページ ２０１１年１２月５日 月曜日 午後５時３５分