Panasonic DMP-UB704 - Video and Audio Routing Scenarios; TV, Projector, and Amplifier Connections

Getting started
- 14 -
Enjoying video with a 4K-compatible TV in combination with a 2K-compatible projector and an
amplifier that is connected to the OPTICAL terminal
HDMI INHDMI IN
OPTICAL IN
HDMI cable HDMI cable
(18 Gbps)
Projector
(2K-compatible)
Amplifier/receiver
Optical digital cable
Setting
Set the following items in the setup menu (> 29):
≥ Set “HDMI(VIDEO) Output Mode” to “Automatic ( Video Only / Video+Audio )”. (> 29)
≥ Set “HDMI(AUDIO) Output Mode” to “Audio Only”. (> 29)
≥ To enjoy audio with an amplifier connected to the OPTICAL terminal
Set “Audio Output” to “Off” in “Advanced Settings”. (> 30)
≥ To enjoy audio with a TV:
Set “HDMI(VIDEO) Output Mode” to “Video+Audio”. (> 29)
Set “Audio Output” to “On” in “Advanced Settings”. (> 30)
≥ To enjoy video with a projector
Set “HDMI(AUDIO) Output Mode” to “Video+Audio”. (> 29)
(It is not possible to output 3D, 4K or HDR content from the HDMI OUT terminal when “Video+Audio”
is selected.)
DMP-UB704_EG-TQBS0021_eng.book 14 ページ ２０１６年８月３０日 火曜日 午前１１時８分