Getting started
5
TQBA2018
Getting startedGetting started
Accessories
Check the supplied accessories before using this
unit.
≥ Product numbers are provided in this Owner’s Manual
correct as of June 2016.
These may be subject to change.
≥ Do not use AC power supply cord with other equipment.
∫ Using the remote control
Insert the batteries to the terminal so that it (i
and j) matches those in the remote control.
Unit and media care
∫ Clean this unit with a soft, dry
cloth
≥ Never use alcohol, paint thinner or benzine to
clean this unit.
≥ Before using chemically treated cloth, carefully
read the instructions that came with the cloth.
∫ This unit’s lens
Use the lens cleaner (not supplied) to clean the
unit’s lens.
∫ Clean discs
Wipe with a damp cloth and then wipe dry with a
dry cloth.
∫ Disc and card handling
precautions
≥ Handle discs by the edges to avoid inadvertent
scratches or fingerprints on the disc.
≥ Do not attach labels or stickers to discs.
≥ Do not use disc cleaning sprays, benzine,
thinner, static electricity prevention liquids or
any other solvent.
≥ Clean any dust, water, or foreign matter from
the terminals on the rear side of the card.
≥ Do not use the following discs:
– Discs with exposed adhesive from removed
stickers or labels (rented discs, etc.).
– Discs that are badly warped or cracked.
– Irregularly shaped discs, such as heart
shapes.
1 Remote control
(N2QAYA000131)
2 Batteries for remote control
1 AC power supply cord
(K2CB2YY00098)
Point it at the remote control signal sensor on this
unit. (> 9)
R03/LR03, AAA
(Alkaline or manganese batteries)
PlaybackReference
DMP-UB900_P-TQBA2018.book 5 ページ ２０１６年６月８日 水曜日 午後４時４９分
To Next Page
Loading...
