Editing video
SQT0807
55
[HDD] [USB _HDD]
File Conversion is a function to convert the
recording mode of the title in DR mode and
AVCHD contents. The size of the converted title
will be small regularly. It will take about the same
time as the recorded duration.
To cancel a “Now” conversion
Press and hold [RETURN ] for more than
3 seconds.
To cancel a “During standby” conversion
After performing steps 1–2 (> 53, Editing
recorded titles)
1 Select “File Conversion” in “Edit”, then press
[OK].
2 Select “Yes”, then press [OK].
File Conversion
1 Select “File Conversion” in “Edit”, then press
[OK].
e.g.,
2 Set the conversion options, then press [OK].
Recording Mode (> 9):
• [USB_HDD] You cannot select XP, SP, LP and
EP mode.
Subtitles:
•Automatic
Subtitles will be recorded if they are included
in the title.
•Off
Subtitle will not be recorded.
Timing:
•Now
Conversion begins immediately after step 4.
• Timer recording will not be performed
during conversion.
• If an encrypted title ( ) is included, “Now”
cannot be selected.
• During standby
Conversion will be performed after the unit is
switched to standby mode.
File Conversion
Convert the selected title by changing its recording mode.
Please select recording mode and other options, then press OK.
RETURN
Subtitles
Off
Recording Mode
HL -- Longer Play
Timing
During standby
OK
3 Select the item, then press [OK].
Convert & Delete:
The original title will be deleted to save HDD
capacity after conversion.
Convert Only:
The original title remains after conversion.
• The original title will be deleted after File
Conversion, if the selected title is indicated
with . (> 15)
4 “Now” conversion:
Select “Start”, then press [OK].
“During standby” conversion:
Press [OK].
• Conversion will be performed after the unit is
switched to standby mode.
“Copy” or “Conversion” on the front panel
display remains lighted during conversion.
• If the title is encrypted ( ), conversion
will start after decryption.
DMR-BST_BCT855EG_eng.book 55 ページ ２０１５年６月４日 木曜日 午後２時５８分
To Next Page
Loading...
