Error
Code
Diagnosis contents Description Monitor
Display
Automatic FL display
PLEASE
WAIT
Restoration operation
--------------------------------
----------
Unit is in termination
process
Since the power cord fell out
during a power failure or
operation, it is under restoration
operation.
*It will OK, if a display disappears
automatically. If a display does
not disappear, there is the
possibility that defective Digital
P.C.B. / RAM drive.
------------------------------------------------
-------------
Unit is in termination process
now.
“BYE” is displayed and power
will be turned off.
In case “Quick Start” of setup
menu is ON, it is displayed in
restoration operation for AC off.
No display
UNFORMAT
Unformatted disc error You have inserted an
unformatted DVD-RAM or DVD-
RW that is unformatted or
recorded on other equipment.
8.1.2. Special Modes Setting
Item FL display Key operation
Mode name Description Front Key
TEST Mode *All the main unit's parameters
(include tuner) are initialized.
Press [STOP], [CH UP]
and [OPEN/CLOSE] keys
simultaneously for five
seconds when power is
off.
Rating password The audiovisual level setting
password is initialized to “Level
8”.
Open the tray, and press
[REC] and [PLAY]
simultaneously for 5
seconds.
Service Mode Setting every kind of modes for
servicing.
*Details are described in “8.1.3.
Service Mode at a glance”.
When the power is off,
press [CH UP], [OPEN/
CLOSE] and [REC] keys
simultaneously for 5
seconds.
24