Item FL display Key operation
Mode name Description Front Key
Forced disc eject Removing a disc that cannot be
ejected.
The tray will open and unit will
shift to P-off mode.
*When Timer REC is ON or EXT-
LINK is ON, execute " Forced disc
eject " after releasing Timer REC
or EXT-LINK.
*This command is not effective
during "Child lock" is ON.
While Demonstration Lock is
being set, this Forced disc eject
function is not accepted.
The display before
execution leaves.
When the power is off,
press [STOP] and [CH UP]
keys simultaneously for 5
seconds.
Child lock/unlock Set or release “Child Lock”. Press [ENTER] and
[RETURN] by remote
controller simultaneously
until [X-HOLD] is
displayed.
NTSC/PAL system
select
To switch PAL/NTSC altemately. The display before
execution leaves.
While the power is on (E-E
mode), press [STOP] and
[OPEN/CLOSE]
simultaneously for 5
seconds.
Forced power-off When the power button is not
effective while power is ON, turn
off the power forcibly.
*When Timer REC is ON or EXT-
LINK is ON, execute “Forced
Power-off” after releasing Timer
REC or EXT-LINK.
Display in P-off mode. Press [Power] key over
than 10 seconds.
25
To Next Page
Loading...
