Item FL display Key operation
Mode name Description Front Key
Demonstration
lock/unlock
Ejection of the disc is prohibited.
The lock setting is effective until
unlocking the tray and not
released by “Main unit
initialization” of service mode.
*When lock the tray.
“LOCK” is displayed for 3
seconds.
When the power is on,
press [STOP] and
[POWER] keys
simultaneously for 5
seconds.
*When unlock the tray.
“UNLOCK” is displayed
for 3 seconds.
When the power is on,
press [STOP] and
[POWER] keys
simultaneously for 5
seconds.
*When press OPEN/
CLOSE key while the tray
being locked.
Display “LOCK” for 3
seconds.
Press [OPEN/CLOSE] key
while the tray being
locked.
ATP re-execution Re-execute ATP. Display at ATP executing. When the power is on (E-E
mode), press [CH UP] and
[CH DOWN]
simultaneously for 5
seconds.
Progressive
initialization
The progressive setting is
initialized to Interlace.
The display before
execution leaves.
When the power is on (E-E
mode), press [STOP] and
[PLAY] simultaneously for
5 seconds.
8.1.3. Service Modes at a glance
Service mode setting: While the power is off, press REC, CH UP and OPEN / CLOSE
simultaneously for five seconds.
27
To Next Page
Loading...
